Experimental and Field Observation of Dynamic Behavior of Buried Pipelines
Cyclic torsion, axial pull-out, and bending data from experiments conducted on jointed utility pipelines buried at several depths are presented. It is found that linear relationships exist...
Earth Pressure and Surface Load Effects on Buried Pipelines
Rational techniques for analyzing earth pressure and surface load effects, based on finite element analysis methods, have been developed and applied extensively to the design of buried...
Characterization of Soil Arching Above Buried Conduits
Conventional ways of assessing the effects of soil arching over buried conduits were examined by means of finite element analyses. It was found that neither of the conventional soil arching...
KEMCOR?A Chemical and Corrosion Resistant Piping System
KEMCOR is a new underground composite pipe system designed for chemical process use in such industries which require a high degree of corrosion resistance to varying concentrations and...
Prediction of Fine Sedimentation in Small Marinas
Shoaling due to fine, cohesive sediment deposition in small marina-type basins is governed by basin geometry, hydrodynamic factors and sediment load in outside waters. An easily programmable...
Economics of Hydrothermal Power Development
The overall performance of a hydrothermal power plant with pumped storage is more cost effective than its competitive counterparts such as oil and gas turbine-generators. The operation...
Karnafuli Hydroelectric Project, Hydraulic Model Studies of Spillway Damage
The Karnafuli Hydroelectric Project is located in Bangladesh. On August 13, 1961, distress was noted in the spillway flow. A special Board of Consultants considered possible causes for...
Instrumentation for an Uplifting Ice Force Model
Pile-supported, light duty structures are especially vulnerable to the uplifting forces. To evaluate the parameters that control the magnitude of the uplifting force a laboratory model...
How Will People Movers Affect Downtown Areas?
The year 1980 was a pivotal one for the downtown automated people mover development process in both Detroit and Miami. In that year both cities completed their preliminary engineering/environmental...
The Neglected Challenge in Metropolitan Area Transportation
The central fact about metropolitan area transportation is the gross mismatch between the medium and low density patterns of settlement that are dominating the evolution of metropolitan...
Investigation of Design Criteria for APM Guideways
Designers have relied mostly on the provisions of the American Association of State Highway and Transportation Officials (AASHTO) Standard Specifications for Highway Bridges. Sometimes...
Human Interface Design of an APM Control Center
The control center of an Automated People Mover (APM) system is a man-machine system. Both software and hardware aspects of the design of the monitor room that directly affect ease of...
A New Alternative in Steel Construction?Partially Restrained Connections
Lack of formal training in methods as well as the lack of specific guidelines have limited the understanding and utilization of semi-rigid connection technology. A renewed interest in...
The Effect of Connection Flexibility on Steel Members and Frame Stability
With the advent of Load and Resistance Factor Design (LRFD) and the many existing moment-rotation curves for connections, the use of actual connection flexibility in the design process...
Utilization of Experimentally Obtained Connection Data in Assessing the Performance of Steel Frames
Data from over 70 separate experimental studies on steel beam to column connections are reviewed with particular reference to the joint's in-plane moment-rotation characteristic. More...
Behaviour and Strength of Steel Frames with Semi-Rigid Connections
A research study was started at the Politecnico of Milan (Italy) to investigate the influence of the main governing parameters on the behaviour and strength of flexible frames. A sophisticated...
Joint Flexibility in Steel Frames
This paper investigates the effects of connection flexibility and panel zone deformation on the behavior of plane steel frames. The incorporation of these factors in frame analysis will...
Behavior of Cavity Masonry Walls Under Out-of-Plane Lateral Loading: An Analytical Approach
In this paper, a finite element model is used to analyze cavity walls in an attempt to understand their complex behavior and to evaluate the adequacy of the assumptions embodied in the...
Wall/Floor-Slab Interaction in Brickwork Structures
The paper summarises the results of three series of tests on sections of brickwork structure carried out with a view to determining the characteristics of wall/floor slab joints in terms...
Decision Support System for Tunneling
This paper first discusses methodologies for considering geological uncertainty in tunneling projects and for determining the most economic excavation and support methods under such condition;...
Return to search