Cleaning Up Toxics
Case histories show how several different types of contamination cleanup were handled. In Attleboro, Mass., washwater, used to decontaminate equipment and tools after cyanide was removed...
Fire on the Water
Incineration is a promising hazardous waste disposal technique. However, nobody wants an incinerator constructed near him, so waste handlers are considering burning hazardous wastes at...
Treatment in Your Own Backyard
Everyone wants the nation's hazardous waste sites cleaned up, but nobody wants the wastes disposed of near them. Therefore, cleaning up these problems at the site may be the...
Attapulgite: A Clay Liner Solution?
Poor performance of clay liners at waste management facilities has resulted in the EPA mandate of synthetic polymeric liner materials to comply with zero penetration requirements. Laboratory...
Risk Assessment: Engineering Tool
In factoring in human-health impacts when tackling an environmental problem, risk assessment is often the best approach. Its use is growing fast. The technique increasingly is being used...
Seismic Restraint of Hazardous Process Piping
The lack of appropriate guidelines for the design and installation of hazardous process piping in industrial facilities has created a potentially dangerous situation. Process piping carrying...
Improving Maintenance Performance
This discussion concerns Maintenance Management concepts that emphasize how the human element among Port personnel can be organized and efforts channeled so as to: increase the actual...
Expert Systems in Civil Engineering
The importance of expert systems, also referred to as knowledge based expert systems, has been growing in all areas of civil engineering practice. The papers in this book were presented...
Treating Sewage in One Tank
A sequencing batch reactor (SBR) was the answer to a sewage problem that was holding up community development in Poolesville, MD. Poolesville was one of the first municipalities in the...
Drying Out
Treatment plants are most efficient when they're treating waste, not water. Spurred on by increased fuel prices, a number of new technologies have been developed that can...
Bugs and Carbon Make a PACT
At its Chambers Works in southern New Jersey, DuPont was ordered to sharply reduce the BOD load in the wastewater it discharged to the Delaware River. Out of this mandate came the PACT...
Liquefaction Study of Coal Refuse by Nuclear Gauges
This paper presents a technique for utilizing nuclear gauges to determine density and moisture content continuously throughout refuse embankments and slurry reservoirs. The nuclear measurements...
Cone Penetrometer Use on Uranium Mill Tailings
Piezocone data were found to be very reliable in the identification of uranium tailings according to the traditional categories of sands, sand-slime mixtures, and slimes by the use of...
Implications of Soluble Microbial Products (SMP) Formation on Biofilm Reactor Performance
The objective of this study is to evaluate the implications of SMP formation for biofilm treatment. To do so, the extended steady-state model was applied to predict effluent concentrations...
The Optimization of Nitrification and Denitrification in Plug-Flow Activated Sludge Systems Treating Municipal Wastestreams
Most conventional plug-flow activated sludge plants experience nitrification, particularly during higher temperature conditions. Under these circumstances, additional power is required...
Predicting Radon Transport by Vegetation
Establishment of a vegetative cover on waste sites containing **2**2**6Ra (Radium) may provide conduits for transport of **2**2**2Rn (Radon) out of the waste into the above-ground environment...
Recyclying of Dust from Electric Arc Funances�An Experimental Evaluation
Each year the electric arc steelmaking industry generates approximately 650,000 tons of dusts containing valuable metallic resources such as iron, zinc, lead, and chromium. EAF dust is...
Combustion Sources of Residential Air Pollution: An Overview
Combustion by-products are a major source of indoor air pollution and have been measured in homes at levels above typical outdoor concentrations, and at levels which approach or exceed...
Emission and Control of Volatile Organics in Hazardous Waste Landfills
Landfill simulation and modeling can provide a useful tool in the management of hazardous wastes to estimate the vapor phase emissions of pollutants so that a realistic assessment can...
Testing of Permeable Materials for Retaining Contaminants in Subsurface Leachates
The use of a permeable, retentive treatment system could remove both organic and inorganic contaminants while still allowing flow. A testing procedure for determining the amounts of priority...
Return to search