Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
A Damping Model for the Vibration of Nonlinear Laminated Composite Cylindrical Panels with High Order Transverse Shears
The damping characteristics of nonlinear vibration of a cylindrical panel including large displacements/rotations and parabolic transverse shears has been discussed in this study. The...
On the Adhesive Strength of Viscoelastic Fibrous Composites
A methodology for solving problems of anisotropic materials using the theory of elasticity (viscoelasticity) is presented. Some results on specific problems related to the stressed-and-deformed...
Finite Element Analysis and Testing of a Laminated Composite Fuselage Test Structure
A test structure modeling a full scale section of a composite aircraft fuselage was designed, analyzed, fabricated, and pressure tested. The test structure consisted of a cylindrical graphite...
Damage Tolerance of Composites
The damage tolerance issue in composites is driven by the requirement for and implementation of a structural integrity criterion for a structural system. A key element in the design philosophy...
On the Design of Laminated Composite Flange: A Model with Experimental Verification
A parametric model has been developed for the optimum design of laminated composite flange. The study focuses on the evaluation and performance optimization of composite flanges with the...
Visualization of the Microstructural Response of Lightly-Cemented Granular Soils Under Uniaxial Strain Conditions
The microstructural response of granular soil under uniaxial strain is being investigated through direct observation of micromotions. Two techniques are being refined to quantify individual...
Acoustic Emission Source Locations in Concrete
The location of acoustic emission (AE) sources can potentially provide information on the fracture process zone in brittle materials such as concrete. Typical AE experiments generate very...
Experimental Techniques to Study the Microstructure of Cement-Based Materials
Techniques to identify phases and changes in microstructure within cement paste, mortar, and concrete using a scanning electron microscope and image analysis system are described. Backscattered...
Cement and Concrete Characterization by Scanning Electron Microscopy
The scanning electron microscope (SEM) is a powerful tool for the microstructural and chemical characterization of cement and concrete. Imaging techniques such as secondary electron, backscattered...
Atomistic Simulation and Visualization of Thermal Disorder in a Crystalline Ice
The process of thermal disorder in crystalline ice has been simulated using a molecular dynamics model. The thermal disorder is induced by raising the temperature of the system. The molecular...
Simulation of Failure Processes in Cementitious Particle Composites
Progressive failure analysis in cementitious particle composites such as concrete requires a realistic description of the topology of the composite structure and the interaction of the...
Mechanical Behavior of Composites with Interphases
The effect of interphases on the mechanical behavior of fiber-reinforced composites is studied. Two problems, a cracked fiber in a matrix, and a fiber pulled out of a matrix, are discussed....
Micro-Damage Process Model for Polycrystalline Ice
This paper presents a micro-damage process model for freshwater polycrystalline ice deforming at the high end of the ductile-to-brittle transitional domain of strain rated. Damage is attributed...
Deformation of Concrete Due to Drying
The deformation of drying concrete is numerically investigated considering the effect of random arrangement of coarse aggregates. The result indicates that a part of the statistical variation...
Instability and Plastic Flow of Soils
Materials should according to Drucker's postulate become unstable when the second increment of plastic work is negative. Experimental observations however show otherwise....
Constitutive Relations for Large Deformation Plasticity
Influence of the choice of measures of stress and deformation upon the representation of constitutive relations for elasto-plastic solids undergoing finite deformation is discussed. The...
Modeling of Successive Impacts in Sand
The principal aspects of numerical modeling of successive, high energy impacts in sand are discussed in this paper. These include the numerical formulation used for solution of the equations...
Microscopic Modeling of Shear Strength of Contaminated Soils
The degradation of shear strength of soils due to prolonged contamination of soils is an emerging problem. The experiments conducted at New Jersey institute of Technology showed a gradual...
Geometry of Yield Surfaces for Frictional Flow of Granular Materials
In the frictional flow regime, the discrete particles which compose of granular material roll or slide over one another, maintaining essentially continuous contact. Many theorists, including...
Return to search