Small Hydro Technology Transfer Project: Licensing Activities
This paper summarizes a report that is part of the Small Hydro Technology Project, sponsored jointly by the Department of Energy and the Electric Power Research Institute (EPRI). The Licensing...
Monitoring Techniques for Thermosyphons
Two-phase thermosyphons used for passive soil refrigeration are monitored using a variety of techniques ranging from visual infrared scanning to measurement of internal pressures. Methods...
Wastewater Plant Cold Weather Operational Problems
A questionnaire survey was conducted at biological wastewater treatment facilities in northern New England. Problems associated with various unit processes, due to cold weather operations,...
F.E.M. Analysis of Mobile Arctic Caisson Island With Stochastic Material Properties
The paper examines how soil uncertainty influences the short term settlements and stresses of the Mobile Arctic Caisson on the original sea bed. Utilizing a two-dimensional plane strain...
Finite Element Analysis of Concrete Armor Units Subject to Wave Impact
Concrete armor units are commonly employed for the protection of shorelines and rubble structures. Their design is primarily based on hydrodynamic stability. However, their structural...
The Asbestos Impasse
Removing asbestos from the nation's buildings is a major task . Consulting engineers can play an important part in the process, locating and quantifying the carcinogenic material,...
Stochastic Finite Element Methods in Dynamics
This paper develops a stochastic finite element solution method utilizing a Neumann expansion of the operator matrix involved and at the same time, devises an efficient Monte Carlo method...
Problems of Spectral Analysis in Dispersion Tests
The use of dispersive surface waves and spectral analysis methods is new to the nondestructive testing of airfield pavements. Such tests are to determine whether mechanical properties...
Random Vibration of Mass-Loaded Rectangular Plates
The classical method of separation of variables in conjunction with the Green's function of the vibrating plate is used to obtain the solution of the free vibration problem...
Stochastic Response for Tertiary Systems
A modal superposition method is presented for obtaining the response of a single-degree-of-freedom tertiary subsystem mounted on a primary-secondary system. The method is direct in that...
Rigid Body Random Rocking Prediction
The stochastic rocking of a rigid block due to shaking of its foundation is examined. The foundation is flexible (Winkler) and its independent springs and dashpots separate from the block...
Stochastic Response of Structures with Appendages Containing Fluids
Following a perturbation technique a procedure is developed to compute the modal properties of a system consisting of a fluid containing appendage attached to a multi-degree-of-freedom...
Optimal Control of Seismic Structures
This paper presents the algorithm for optimal design of structural systems with active tendon controllers and/or active mass dampers. The structure is subjected to earthquake excitation...
A Stochastic Source Spectrum for Engineering Application
The solution of a point source (double couple) combined with K. Aki/A. S. Papageorgiou's stochastic source model is used to establish the power spectrum at the acceleration...
An OCEANWHEEL Breakwater
The compression wall and tension spoke structural system (OCEANWHEEL) transfers lateral loads from sea surface to seafloor efficiently. It promises a wide variety of uses beyond the described...
Tacoma Sea-Land Terminal: A Project Management Challenge
The Port of Tacoma completed a new two berth container terminal and intermodal yard for Sea-Land in May 1985 in only 26 months after signing a binding agreement. The project, which also...
Port Expansion of Eastport, Maine
A recent pier expansion now allows Eastport to provide 40 feet of water at low tide. The pier expansion consists of a concrete-decked steel pipe pile-supported extension to an existing...
Designing Marinas to Mitigate Impacts
The John Wayne Marina was permitted for construction only after certain design features were altered to accomodate major biological and water quality concerns. The moorage basin was relocated...
Perforated Wave Barriers in Small Boat Piers
Perforated breakwaters can be used to reduce the energy and the height of waves entering small boat harbors. By not extending the breakwater to the bottom interference with littoral drift...
Design Concepts for Floating Breakwaters
This paper describes a fundamental approach to the design of a floating breakwater based on the concepts of dynamic analysis of floating bodies. The process results in a relatively simple...
Return to search