Combined Compression-Shear Experiments on Mortar-Aggregate Interfaces
Material interfaces between matrix and aggregate particles in cementitious composites such as concrete are considered to be a very important component of the material microstructure, which...
Use of Geogrids on Soft Deposits
The construction of highway embankments over soft and waste deposits required the use of geogrids as an economical alternate to conventional methods of 'remove and replace'....
Rate Effects on Fracture of Concrete
An analytical and experimental investigation of mode I (tensile and mixed mode (combined tensile and shear) fracture of concrete subjected to impact loading was conducted. The rate of...
Creep of Polycrystalline Ice
This paper discusses the extension of creep models for polycrystalline ice to include the effects of a non-monotonic loading history. Attention is focussed on cyclic loading since it is...
Improved Prediction of Masonry Durability Through Advanced Materials Science Methods
Several trends in the use of materials in civil engineering have made it imperative to improve the ability to predict the durability of masonry. This will require more emphasis on materials...
Use of Voluntary Consensus Standards by the Bureau of Reclamation
This paper outlines how the Bureau of Reclamation has historically participated in standards development for emerging technologies, and how present standards are applied or adapted for...
Asphalt Cement Specifications and HMA Performance
The standard specifications generally used for hot mix asphalt (HMA) are those published by the American Society for Testing and Materials (ASTM) or the American Association of State Highway...
Are ASTM Standards Enough?
ASTM (American Society for Testing and Materials) is most likely the World's most renown developer of voluntary consensus standards. Its standards development process utilizes...
Fiber Reinforced Plastic Grids for the Structural Reinforcement of Concrete
The use of fibre resin plastic grid is investigated as a primary bending reinforcement in concrete members. Laboratory bending data is compared with theoretical results using ACI 318-83...
Spectral Techniques for Serviceability and Durability Assessment of High-Performance Construction Materials
Using spectral techniques, one can obtain the frequency content of a material specimen. Spectral measurements were made on specimens of Portland cement and a polymer based materials. In...
Durability of Fly Ash Concrete in the Marine Environment
This paper presents the experimental investigation of durability of air-entrained fly ash concrete in the marine environment. The findings indicate that the deterioration rate of durability...
Effect of Fly Ash on the Microstructure and Durability of Concrete
The influence of fly ash on the microstructure and durability of concrete was investigated. It was found that the use of 50% fly ash in concrete reduced greatly its resistance to freezing-and-thawing...
Permeability Effects on the Sulfate Resistance of Concrete
A laboratory study was conducted to determine the effect of permeability on the sulfate resistance of concrete containing fly ash. Concrete specimens were moist cured for 7 and 100 days...
High Performance Fiber Reinforced Cement-Based Composites
Fracture of cement-based composites reinforced by the relative high fiber volume is studied. Crack propagation and damage distribution were examined by laser holographic interferometry....
Material Properties Related to Pavement Performance
As part of the Strategic Highway Research Program, an effort has been made to review research literature which can be used to relate asphalt properties to pavement performance. This report...
Relationship Between Laboratory Aging Tests and Field Performance of Asphalt-Concrete Mixtures
Aging of asphalt mixtures is primarily associated with loss of volatile components and oxidation in asphalt during the construction phase (short-term aging), and progressive oxidation...
Load-Deflection Performance of FRP Molded Grating
This research project deals with fiberglass reinforced plastic (FRP) molded grating, its properties, manufacturing materials used and appearance. Grating strength, configuration, weight...
Shear Properties of Pultruded Glass FRP Materials
The in-plane shear modulus and the in-plane shear strength of a variety of pultruded glass fiber reinforced plastic (FRP) materials were measured experimentally in a pilot test program...
High Strength, High Denier Discrete Polymer Fiber in Cementitious Composites
A series of 3-point beam tests were performed on the cementitious composites specimens reinforced with high strength, high denier discrete polyester fibers. The fiber length, fiber volume...
Field Performance of Fiber Reinforced Concrete Highway Pavements
This paper reports the evaluation of field performance of fiber reinforced concrete pavements. The concrete was designed for a compressive strength of about 40 MPa. Steel fibers with hooked...
Return to search