A Correlation Study on the Spectrum Decomposition Method
The major elements of the Spectrum Decomposition Method (SDM) are reviewed together with its automated process for generation of in-equipment response spectra (IERS). The floor required...
Fluid Structure Interaction Analysis of a Concrete Suppression Chamber of Mark I Containment System
Recent studies have demonstrated that the interaction between a structure and fluid can have a significant influence on the response of the overall system when subjected to certain dynamic...
A Pseudo Response Spectrum Method for Mark I Loads
A pseudo base motion response spectrum method is developed to uniquely evaluate the periodic condensation oscillation and chugging drag loads that may occur on submerged structures within...
Containment Capability
Section 2. 0 of this report contains a description of analysis methods for the containment structure. Testing on containment models and sections of containments is described. Section 3....
Experimental Determination of Fluid-Coupling Coefficients in an Array of Hexagonal Prisms
The problem is related to the seismic analysis of fast breeder reactor cores, where the fluid trapped between the subassemblies is known to have a considerable influence on the core response....
Engineering Mechanics in Civil Engineering
The principles of engineering mechanics and the application of these principles to civil engineering problems cover a broad spectrum of topics ranging from theory to practice. These proceedings...
Centrifugal Modeling of Pile Foundations
Modeling of pile foundations in a centrifuge, where the self weight induced stresses in the soil are simulated by elevated gravity loading, is described. Hollow pipe piles in a stiff clay...
A Flat-Dilatometer Study of Lateral Soil Response
The effect of flat dilatometer penetration on the lateral stress conditions in soil around the dilatometer blade and the soil response against dilatometer diaphragm deflection were investigated...
Dynamic Stiffness of Pile Groups
A number of procedures have been proposed for the dynamic analysis of complete pile foundations including group effects. Most of these introduce some sort of approximation to reduce the...
Computer Aided Design of Reinforced Concrete
An interactive computer-aided design (CAD) program for the design of reinforced concrete members is herein described. The program, called ECPRS, designs reinforcement and performs all...
Study on Secondary Compression of Clays
An elastoviscoplastic constitutive model shows that a strain rate effect parameter is related to the coefficient of secondary compression. The relation was verified experimentally by test...
Consolidation Performance of Soft Clays: Part 1. Model
The simplified version of the soil model used in the finite element scheme is a linear anisotropic elastic model. Part 1 defines the parameters needed for the model and the laboratory...
Consolidation Performance of Soft Clays: Part 2. Predictions
The simplified version of the model described in Part 1 was used to predict the short-term performance of the St. Alban test fill. The long-term predictive capability of the model was...
Consolidation of Multi-layered Clay
Three kinds of clay with different plasticity were pre-consolidated from slurry and combined into typical two layered systems consolidated under 40 tf/m**2 with single drainage condition....
Consolidation by Sand Drain in Anisotropic Ground
The author reduces Biot's equations of consolidation into a single governing equation with the excess pore water pressure as the only unknown function and derives the theory...
Perspectives on Modelling Consolidation of Dredged Materials
The physical and mathematical aspects of this problem are highly nonlinear and material-property relationships extend beyond the scope of standard geotechnical engineering. The potential...
Instrumentation Performance in Soft Clay Soils (A Case History)
In 1978, IDEAL BASIC INDUSTRIES, INC. initiated construction of a cement manufacturing plant located south of Mobile, Alabama on the Theodore Ship Channel. Because deltaic clays were too...
Charlotte Harbor Beach Nourishment
The project consisted of dredging approximately 300,000 cubic yards (229, 380 cubic meters) of material, utilizing a seagoing hopper dredge, from the entrance channel of Charlotte Harbor,...
Management Plan for Dredged Maintenance Material
The Mobile District Corps of Engineers is responsible for the maintenance of an authorized Federal deep-draft navigation project at Pascagoula Harbor, Mississippi. The development of the...
Modeling the Drying of Dredged Material
The drying of dredged material was modeled mathematically as a diffusive process and the governing equation was solved using an integral method. Closed form solution equations are presented...
Return to search