Statistical Analysis of Occupant Dynamic Loads
Human-induced load-time histories were modeled by several dependent descriptive parameters. These parameters were treated as functions of two independent variables in a multivariate regression...
Reduction of Imposed Loads for Beam and Column Design
Imposed loads on beams and columns are generally reduced to effect in economy in design. A study to evaluate the reduction criteria by evaluating the Equivalent Uniformly Distributed Loads...
Design Wind Loads for Broadcasting Antennas from Short Time Records
Very useful would be procedures for the determination of the design wind load on the basis of short time records, of duration comparable with the preliminary and/or design phases, so that...
Stochastic Properties of Wind Spectra
In the first part of this paper the correlation function of measured wind spectra is compared with theoretical correlation models assuming a stationary wind process. This comparison indicates...
Pressures on Prisms in Turbulent Shear Flows
Experimental results are presented which show that Melbourne's 'Small Scale Spectral Density Parameter,' S, controls the negative pressures on the...
Dynamic Response of Tall Buildings to Wind Loads
The purpose of this study is to perform a probabilistic analysis of tall buildings subjected to wind excitation. A time domain simulation is first applied to the nonlinear problem. After...
Endochronic Theory and Non-Llinear Stochastic Dynamics of 3-D Frames
Analytical continuous expressions of the material constitutive law are required by equivalent linearization techniques in nonlinear stochastic dynamics. Extensions to study 3D frames,...
Response of Two-Span Beam to Spatially Varying Earthquake Excitation
The effect of the spatial variation of strong ground motion should be considered in the analysis and design of large structures such as bridges, lifelines, dams, etc. The stochastic response...
A Tower-Like Structure with Distributed Stiffness, Mass and Plastic Zones Under Random Earthquake Loading
Random vibrations of an elastoplastic structure are treated by taking into account the finite spread of plastic zones as well as the effects of distributed mass and stiffness. Solution...
Probabilistic Structural Response of a Turbopump Blade to Random Pulse Loading
The objective of this work is to develop probabilistic models of the response of a Space Shuttle Main Engine (SSME) turbopump blade to random impact loading. These loads are caused by...
A Probabilistic Comparative Study of Various Base Isolation Systems?Nonstationary Earthquake Excitation
A probabilistic comparative study of various base isolation systems is carried out. The laminated rubber bearing with and without lead plug, the resilient-friction, and the EDF base isolation...
Reliability of Daniels-Systems Oscillators Including Dynamic Redistribution
The reliability of redundant systems under stationary Gaussian white noise excitation is investigated with emphasis on the dynamics of redistribution of internal forces after brittle failure...
Applying the Time-Reliability Equation
This paper presents a methodology for rigorously including time-varying elements of reliability through the use of the time-reliability equation. An example reliability analysis which...
Quantifying Quality Improvement Programs
Structural codes are evolving to a limit state design basis in which the safety checks are derived from the underlying probability distributions of strength and loads. An example safety...
Fatigue Reliability of Ship Hull Girder
Based on estimates on uncertainties in wave loading and fatigue capacity the fatigue reliability of ship hull girder is calculated with respect to global vertical wave bending moment....
Effect of Air Gap on Platform Reliability
A simplified reliability study of the effect of lateral wave forces impacting the deck of a fixed platform is presented. The reliability of the deck legs, considered the primary resistance...
Rainflow Cycles in Nonstationary Gaussian Processes
This paper develops a methodology for calculating the probability distribution for rainflow cycles in a nonstationary Gaussian process. The up- and downcrossing rates are estimated for...
Probability of Failure Under a Biaxial State of Stress
Structural components are subjected to uniaxial stress states only infrequently. Even under such simple conditions as direction tension or bending the presence of holes, cutouts and other...
Reliability Study of Randomly Imperfect Beam-Columns
In this study, the effect of random initial geometric imperfections was treated as a set of equivalent random initial forces. This concept enables the direct employment of existing stochastic...
Time Variant Reliability Analysis Using Bivariate Diffusive Crack Growth Models
This paper is concerned with the development of a time-dependent reliability concept. The time variant load carrying capacity, i.e., resistance, of a structure caused by fatigue is expressed...
Return to search