Infiltration as a Dependent Variable in Modeling Furrow Irrigation
Most surface irrigation models assume that infiltration is independent of surface flow hydraulics. However, wetted perimeter has been shown to significantly affect infiltration in furrows....
An Overview of Factors Affecting Land Application of Food Processing Wastes
The food processing industry can use slow rate, rapid infiltration or overland flow systems. Slow rate systems are the most common method used for land application. The limiting design...
Rating Curves for Adjustable Tricklers
This paper presents the approach and results of evaluating adjustable drip/trickle emitters to obtain rating curves. The emitter discharge depends on both system pressure and emitter opening...
Modeling Branching Irrigation Canal Networks
A mathematical model of branching canal network has been developed based on solving the integrated form of Saint Venant equations which describing steady and unsteady, uniform and non-uniform...
California's Dam Safety Program?The Development of Hydrology for Dams (
California's water code provides for supervision of dams and reservoirs with regard to protection of life and property. This code is administered by the Department of Water...
General Design for Modifications to Existing Lower Santa Ana Drop Structures
A model study conducted at the Waterways Experiment Station investigated the possibility of utilizing the existing drop structures of the Santa Ana River. Initial tests on selected existing...
Forty Years of Computational Hydraulics?1960-2000
The definition of computational hydraulics as used herein is: the application of numerical methods for the solution of problems of hydraulic flows, largely as practiced by the civil engineering...
Furrow Modeling with Variable Hydraulic Characteristics
A zero inertia furrow irrigation model was developed to run on an IBM-compatible micro-computer. The depth gradient term of the momentum equation is approximated by averaging over the...
Design Storm Selection for Stormwater Management Master Plans
The design rainfall event is an important performance standard for a stormwater management master plan. A stormwater master plan for Virginia Beach, Virginia, is used as a case study to...
Design of Seepage Fields for Stormwater Disposal
Stricker Pond is a shallow twenty-acre kettle hole pond in south-central Wisconsin. The pond receives runoff from a closed watershed that is rapidly undergoing low density residential...
Site Hydrology and Basin Design Using Spreadsheets
The Soil Cover Complex Method which was developed by the Soil Conservation Service is a commonly accepted method of evaluating site hydrology. The solution of this method is facilitated...
Micro-Illudas for Urban Drainage Design
The Illinois Urban Drainage Area Simulator (ILLUDAS) was developed at the Illinois State Water Survey in 1969 and has been available for use on mainframe computers since 1974. An enhanced...
Seepage/Drainage Investigation Colusa County California
High groundwater in the late winter months saturates the soil profile, causing damage to both crops and soil. Sustained water logging severely damages or destroys orchards. It has generally...
Confidence Intervals for Flood Control Design
The line drawn and labeled as the flood frequency curve is seldom identified as to what confidence is associated to the plot. For example while flood control designs are typically based...
Comparison of Hydrograph Simulation Techniques Used in Structural Design and Watershed Systems Modeling
This paper describes a basin study in which traditional unit hydrograph analysis methods were compared to the E. J. Inman hydrograph technique. Study results indicate that, where suitable...
Design Criteria for Detention Basins in Urban Drainage
Many communities require the use of detention basins in order to manage the increased runoff discharge in all newly developing watersheds. The authors have shown earlier that the typical...
The Storage Matching Technique of Detention Basin Design
In recent years, use of continuous rainfall - runoff simulation with historic rainfall data has become much more popular for the design of detention basins and reservoirs. While it may...
Hydraulics of Enlarging Cannonsville Reservoir
This paper describes the hydraulic studies performed for enlarging the Cannonsville Reservoir with a gate system which could raise the normal storage level without having an adverse effect...
An Application of EPA EXTRAN Model to a Flood Management Study in South Florida
In performing the flood management studies, somewhat unique concerns in South Florida are the backwater conditions due to tidal or non-tidal tailwater, flow reversals from project canal...
A Real-Time Flood Management Model for River-Reservoir Systems
A flood forecasting model has been developed for the Lower Colorado River Authority that can be used in a real-time framework to make decisions on reservoir operations during flooding....
Return to search