Stabilization of a Permafrost Subsidence in the Airport Runway at Bethel Alaska
During the construction of the extension to the Bethel Airport runway in 1969, it was necessary to construct a fill across a small gully. The subbase material in the gully contained some...

Finite Element Modelling of Cold Regions Concreting
Finite element heat transfer computer programs are discussed in regard to their use in modelling cold weather concreting. The concrete material properties required for input to the finite...

Arctic Stream Scour: A Case History
A small arctic stream on the North Slope of Alaska was monitored through one hydrologic cycle. The flow rate of the stream and the progress of its erosion through a breach into an adjacent...

The Transport of Crude Oil Under Saline Ice
A mathematical model was developed to describe the forces acting on an oil slick under saline ice in the presence of a water current. The model was verified through a set of laboratory...

Systems Model for Water Supply Following Earthquakes
The water supply for San Francisco is described with emphasis on the city's auxiliary water distribution network, which provides fire protection for the most heavily built-up...

An Expert System for Inactive Hazardous Waste Site Characterization
The area of hazardous waste management is a broad and multidisciplinary field requiring expertise in engineering, geology, chemistry and toxicology, and is an ideal area for the application...

Changes in Bridge Deck Flutter Derivatives Caused by Turbulence
This paper discusses some of the results of a wind tunnel study that tested the aeroelastic stability of section models in smooth and gusting flow. Wind gusts several times longer than...

Los Angeles and Long Beach Harbors Tidal Circulation Study
Expansion of harbor facilities frequently involves placement of additional landfill and the deepening of channels and mooring areas. A numerical tidal circulation model was used in the...

Treating Sewage in One Tank
A sequencing batch reactor (SBR) was the answer to a sewage problem that was holding up community development in Poolesville, MD. Poolesville was one of the first municipalities in the...

In-Place Permeability Measurement of Slurry Trench Cutoff Walls
A suggested procedure for the in-place measurement of slurry trench cutoff wall permeability is presented. The H. Bouwer and Rice method, employing a single observation well and variable-head...

Slow Rate Sand Filtration Using a Zeolite Surface Amendment
The objective of the study was to obtain detailed information regarding amended filter performance at surface loading rates 2 to 4 times higher than standard flow rates. Experiments were...

Models of Organics Transport Through Soil Columns
A mathematical model is proposed for the transfer of organic solutes in soil. Two cases are considered namely transport of non-adsorptive solutes and transport of adsorptive solutes. Comparative-study...

Modeling the Movement of Volatile Organic Chemicals with Unsaturated Flow
Over the past decade, the rate of groundwater contamination by volatile organic chemicals (VOCs) has increased. Therefore, for both groundwater protection and cleanup, it is necessary...

Modeling Dispersion in Non-Homogenous Formations
A stochastic model of contaminant mixing in non-homogeneous porous media has been developed. The model is three dimensional and relates the contaminant distribution to the probability...

Data from Most Monitoring Wells in Limestone Terranes Are Irrelevant to Pollutant Detection but Reliable Monitoring Can Be Attained: Why and How
The conventional system of using three or more monitoring wells placed down-gradient from a site and one or more background wells placed up-gradient from it is extremely unlikely to detect...

Heat Treatment and Low Pressure Oxidation Systems
A study was performed to identify problems and to document solutions in the design, operation, and maintenance of heat treatment and low pressure oxidation systems for conditioning sludge...

Viscoplastic Fluid Model for Debris Flow Routing
This paper describes how a generalized viscoplastic fluid model, which was developed based on non-Newtonian fluid mechanics, can be successfully applied to routing a debris flow down a...

Engineering Methodology for Delineating Debris Flow Hazards in Los Angeles County
Utilizing historical and field data, elementary geomorphology and simplified hydraulics of debris flows, a mapping strategy has been developed. The delineation procedure includes defining...

Seawater Intrusion in Salinas Valley, California
The rate of intrusion has been estimated to be about 19,000 acre-feet per year. If no action is taken to halt the intrusion, it is projected that in the year 2000 there will be as much...

Flood Risk Below Steep Mountain Slopes
Alluvial fans spread at approximately the critical hydraulic slope below apexes at canyon mouths. Periodic torrents that rage out of the canyons are devastating at the apex and have diminishing...

 

 

 

 

Return to search