Software for Settlement Analysis
The software most widely used in engineering practice as well as for general purposes consists of word processors, spreadsheets, and databases, and these are useful for settlement analysis...
Stress and Settlement of Footings in Sand
In current engineering practice, the magnitude of the settlement of a footing in sand, as compared to the settlement of a different size footing in the same sand, is considered to be a...
Downdrag on Piles: Review and Recent Experimentation
A review of the literature on pile downdrag is provided, within the context of a recent full-scale study involving two pile groups driven in soft clay, subsequently surcharged by a 2.5...
Reliability-Based Assessment of Corps Structures
Due to the limited amount of funding available for maintenance, rehabilitation, and replacement of aging Corps structures, the director of civil works, Headquarters, U.S. Army Corps of...
Quantifying Flood Damage Uncertainty
The U.S. Army Corps of Engineers (Corps) has adopted a risk-based analysis procedure to analyze the effect of uncertainty on flood damages and the benefits of flood damage reduction projects....
Flood Loss Assessment with Integrated Measures
In most cases, the maximum flood loss reduction can be achieved only by an optimal combination of both structural and nonstructural measures. An integrative approach that combines the...
Risk-Based Budgeting for Maintenance Dredging
The U.S. Army Corps of Engineers must estimate the budget required to conduct maintenance dredging at hundreds of sites across the country. The amount of funds needed to do the maintenance...
Developments in Risk Analysis Commercial Software
There has been a marked increase in the number and type of commercial software packages available to support risk and uncertainty analysis. Monte Carlo simulations, the first such tool,...
Risk and Reliability of Water Resources Infrastructure and Engineering Approaches to Risk and Reliability Analysis
The paper summarizes the second session of the conference which discussed the risk and reliability of water resources infrastructure as well as engineering approaches to risk and reliability...
Risk Management Strategies for Natural, Manmade, and Technological Hazards
The sixth session featured three important applications of risk and reliability analysis in water resources planning. Papers were presented on incentives to use reliability and risk analysis...
A Study of Alkalinity Leaching and Residual Strength of Alkaline Stabilized Sludge
The addition of sufficient amounts of quicklime or other alkaline earth oxides to dewatered sludge raises both the pH and temperature of the sludge, resulting in microbial inactivation....
Modeling of Chemical Inhibition of Nitrification
This work contains two quantitative structure-activity relationships (QSARs) modeling chemical inhibition of nitrification, one for heterocyclic compounds and one for acetylenic materials....
Assessing the Reliability of Low Pressure Membrane Systems for Microbial Removal
Low pressure membrane systems are used for microorganisms control in water treatment processes. In this article, the efficiency and reliability of this process is evaluated. Microorganism...
Automated ORP Control for Aerobic/Anoxic Cycling in Oxidation Ditch Treatment
The 1140 m3/d (0.3 mgd) Grand Coulee, WA. oxidation ditch was modified to incorporate a computer-control anoxic/aerobic cycle operation to investigate...
A comparison between computed and measured bed evolution in a river bend
A shallow-water scheme with a movable bed has been employed in order to check the reliability of computations related to the bed evolution when a substantially three-dimensional phenomenon...
Using Drop Structures for Stream Gaging
A long term monitoring program of 15 watersheds, for the purpose of studying channel response to erosion control measures being constructed in north Mississippi, is being conducted by...
Demonstration Project for Scour Instrumentation
A Federal Highway Administration (FHWA) Demonstration Project was developed to facilitate technology transfer of instrumentation related research to the highway industry. The objective...
Experimental Design and Measurement Techniques for Investigation of Two-Phase Flow
Discussing the relevant hydraulical and inter-phasial processes of two-phase flow in open tanks the necessary requirements for set-up and operation of physical model studies are worked...
High-speed Video Analysis of Sediment-Turbulence Interaction
Results from the analysis of high-speed video recordings of particle motion and simultaneous flow visualizations in the near wall region of a turbulent open channel flow are presented....
A Computer-Controlled, Precision Pressure Standard
The operating principles as well as the technical aspects of the implementation of a precision pressure standard are presented here. The instrument can have dual use: either as a pressure...
Return to search