Making Teamwork Work
From consulting firms to steel workers, most work groups would benefit enormously from developing better teamwork, but making it happen isn't easy. Excerpts from
Engineering a Monument, Evoking a Nightmare
Rather than simply standing as a backdrop for exhibits, the $53.2 million U.S. Holocaust Memorial Museum is intended to be part of the fabric of the exhibition itself. Now under construction...
Landfills: Anatomy of Automated Design
California's 360 acre Bee Canyon landfill (completed last year) sits amid a complicated network of narrow canyons with side slopes 300 ft high. As with most landfill projects,...
Collective Excellence
Building Effective Teams
Double Diamonds: New Brand for a Texas Bridge
Double diamond towers, distinctive as a cattle brand but tall as a 44 story building, have reached landmark status on the Texas Gulf Coast even though the bridge they will carry won't...
On the Influence of Seismically Induced Residual Forces on Bridge Abutment Design
The seismic design of bridge abutments depend on the anticipated movement of the abutment during the design earthquake. For seat-type abutments in which the backfill resistance can be...
Analytical Studies on the Seismic Response of Lead Rubber Base Isolated Bridges
Highlights of a study related to the response of base isolated bridges are presented. Four different analytical models are developed and used to evaluate the response of base isolated...
Wavelet Transform Analysis of Several Transient or Nonstationary Phenomena in Engineering Mechanics
Several examples of the use of a wavelet transform in the analysis of transient events in mechanical systems are provided. The transform has the advantage over other transient analysis...
Dynamic Analysis of Sliding Seismic Isolators
The friction pendulum system (FPS) sliding seismic isolators are being used for the seismic isolation rehabilitation of the U.S. Court of Appeals Building, San Fransisco. This paper will...
Computation of Wind Pressures on L-Shaped Buildings
The paper refers to the numerical simulation of turbulent wind conditions around an arbitrarily-shaped building composed of two rectangular blocks. The time-averaged Navier-Stokes equations...
Free Vibration Analysis of Asymmetric Buildings
A simple procedure for free vibration analysis of asymmetric buildings is presented. This method assumes that each floor is a rigid diaphragm with three degrees of freedom (two lateral...
A Wax-Coupled Borehole Seismic Detector for High-Resolution Measurements
A triaxial borehole seismic detector was developed for high-resolution measurements at frequencies up to 2,000 Hz. Applications for this detector include three-component shallow reverse...
Sensitivity of Lifeline Response to Models for the Spatial Incoherence of the Seismic Ground Motions
The sensitivity of the response of above-ground and buried lifelines to different models describing the spatial variability of the seismic ground motions is examined. It is shown that...
Anatomy of the Loma Prieta Earthquake Records of Two Steel Buildings Using MIMO System Identification
The Loma Prieta strong-motion records of a 4-story and a 47-story steel building are analyzed using system identification. A time variation study from the 4-story building records reveals...
Shear Resistance Models for Concrete Bridges
Statistical models are developed for the shear resistance of concrete bridge girders. Two structural types are considered: reinforced concrete T-beams and prestressed concrete AASHTO girders....
A Multiple Disk Centrifugal Pump as an Artifical Ventricle
A pulsatile, multiple disk, centrifugal pump has been analysed and tested for potential use as an artificial ventricle. The pump is similar to a Tesla Turbine design which consists of...
Locally Buckled Plastic Hinge Behavior Under Monotonic and Cyclic Loading Condition
In order to clarify the influences of local buckling under monotonic and cyclic loading conditions, experimental studies were carried out on W8x10 A-36 structural steel members subjected...
Design Codes for Lunar Structures
The American Institute of Steel Construction (AISC) Manual of Steel Construction is a codification for the design and construction of steel structures. It includes information, some tabular...
Design Concepts for a Lunar Concrete Production Facility
This paper discusses concrete production fundamentals on the earth and identifies applicable features required for lunar concrete production. Production principles unique to the lunar...
An Analysis of an Inflatable Module for Planetary Surfaces
Design and construction of a structure on planetary surfaces requires addressing a host of issues not encountered on Earth. A modular quilted inflatable structure consisting of thin membranes...
Return to search