Analysis of Liquefaction Potential by Insitu Testing
This paper describes the results of insitu testing performed to assess the liquefaction potential of a sand formation at a site for a proposed large industrial facility in East Central...
In Situ P and S Wave Velocity Measurement
A review of the in situ techniques to measure P and S wave velocities by seismic wave propagation is presented. A relatively new technique, the suspension PS logging method, is described...
North American Standard Penetration Test Practice: An Essay
The Standard Penetration Test (SPT) is the in situ mechanical soil test most used by North American geotechnical practitioners. The equipment and procedures of the test have periodically...
Landslide-Generated Wave Studies
A serious safety of dams problem is associated with large masses of rock and debris plunging into lakes and causing damaging water waves. This concern prompted the Bureau of Reclamation...
Coastal Protection Guidelines, Orange County, GA
As a result of coastal storms in the past several years the County of Orange (California) incurred large and unanticipated costs in providing emergency protection for private shorefront...
Wave Height Distribution in the Coupled Harbor
Wave height in a harbor sheltered by a breakwater is studied by numerical simulation and experiment. The coupled harbor, attained by setting up double arm breakwaters, was adopted as the...
Feasibility Study of Flood Control for the Maumee River in Allen County, Indiana
In March, 1982 the Maumee River overtopped its banks flooding parts of the City of Fort Wayne and unincorporated areas in Allen County, Indiana. The estimated damage to the area was about...
Laboratory Model Studies of Flood Wave Propagation
Laboratory investigations of unsteady free-surface flow with various combinations of channel and flood conditions were performed. A 72 ft (21. 9 m) long tilting flume was modified to make...
Rapid Assessment of Seismic Vulnerability
The choice of a seismic damage assessment method depends fundamentally on how the assessment will be used, but always involves definition of the expected ground motion and the structure...
ATC Methodology and Data for Rapid Assessment of Seismic Vulnerability
Recently developed Applied Technology Council (ATC) methodology and data provide a technical basis for rapid assessment of structure seismic vulnerability. Methodology developed under...
Evaluation of the Seismic Performance of Buildings
The aim of the paper is to present the different existing methodologies available for the assessment of seismic damage to buildings. The approach aims towards the development of a mini-computer...
Techniques for Estimating Earthquake Probable Loss for Buildings and Contents
The probable maximum loss (PML) is useful for quantifing the seismic risk exposure of a facility and for rational decision making regarding earthquake insurance and seismic strengthening...
Rapid Identification of High Risk Building in Seismic Regions Using Expert Systems
Seismic risk evaluation is a complex problem because it involves many factors such as ground motion, ground failure potential and structural performance with great uncertainties. Many...
Seismic Risk Analysis of a Multi-Site Portfolio of Buildings
A discussion of a methodology that permits the assessment of the seismic risk associated with a group of buildings and incorporates relevant aspects of seismic hazard assessment including...
Application of the BEM to Elastodynamics in a Three Dimmensional Half Space
The boundary integral equations (BIEs) are formulated for scattering problems of elastic waves by a cavity or a crack in a three dimensional half space. Two formulations based on the Green's...
Explicit Integration of Boundary Integral Equations in the Frequency Domain for Wave Scattering Problems
The goals of this article are: (1) to present an efficient method for the integration of the boundary integral equations for wave scattering problems and (2) to apply this method to the...
Seismic Interaction Among Numerous Masses Founded on a Viscoelastic Stratum
The steady-state harmonic response of systems comprising numerous masses resting on a homogeneous, viscoelastic stratum with hysteretic damping is studied. The stratum, bearing on a rigid...
Vibration Isolation of Structures From Surface Waves in Layered Soil
This work deals with the problem of isolation of structures from ground transmitted surface waves generated by machine foundations. The isolation is accomplished by means of rectangular...
Seismic Response of Pipes Supported on Complex Frames
Analytical approaches and modeling techniques used to calculate seismic responses of piping systems, supported on complex open-frame structures, are evaluated. Seismic responses are obtained...
Offshore Platforms Subjected to Wave Forces
The dynamic analyses of offshore platforms are mostly based on the lumped mass matrix method in the frequency domain. Although the approximations involved in the lumped mass matrix method...
Return to search