Recycling Concrete and Asphalt Pavements Rehabilitation of Runway 18R-36L Orlando International Airport
The subject project consisted of reconstructing an air carrier runway utilizing a concrete keel section with asphalt overlays along the runway edges. Associated taxiways were rehabilitated...
Use of Porous Friction Course to Retard Reflection Cracks in Bituminous Overlays
Porous Friction Courses (PFC) are open-graded, high air void, bituminous mixtures that are applied to pavement surfaces to improve skid resistance. In 1989, PFC was used as an interlayer...
Evaluation and Overlay Design of Airport Pavements
Heavy weight deflectometer (HWD), a heavier version of the falling weight deflectometer, enables detailed evaluation of airport pavements to be performed using a rapid a non-destructive...
Rehabilitation of Runway 4R-22L at Chicago's O'Hare International Airport
This paper describes the systematic process that was used to develop a rehabilitation strategy for the busiest runway at O'Hare International Airport. Any rehabilitation alternative that...
Use of Surface Treatments on Airport Pavements
Asphalt is generally used as the surfacing for flexible airport pavements with airline passenger jet aircraft. In Australia and its neighbouring territories, surface treatments (seals)...
Providing People-Mover Access for the Getty Center
An Otis People-Mover System was selected by The Getty Trust to transport visitors to The New Getty Center Museum for the Arts from an entry parking area up a steep hillside to the museum...
The New U.S. Senate Subway System
It was recognized in 1909, when the first Senate Subway System was installed, that a rapid means of securely transporting Senators from their remote offices to the Capitol Building was...
APMs at Tampa International Airport?A Story of Innovation
The Tampa International Airport has been at the forefront of integrating Automated People Movers into airport design for more than twenty years. The need for APM technology comes from...
The TrAAm People Mover Project
TrAAm is the new exclusive people mover for American Airlines at the Dallas/Fort Worth International Airport. Since opening in late 1991 it has been carrying over 18,000 people a day....
Chicago-O'Hare International Airport Transit System (ATS)
This paper describes the development of the O'Hare Airport Transit System, as well as, the individual subsystem elements which make up the entire system. In addition, the paper also describes...
Denver International Airport AGTS?A Progress Report
Denver International Airport (DIA), the first major airport to be built in the United States in nearly 20 years, is under construction approximately 25 miles (40 km) northeast of downtown...
Newark International Airport APM: A Progress Report
This paper presents an overview of the progress of the Newark International Airport APM project, emphasizing facility design and construction....
The Honolulu Airport People Mover Project Unique Challenges?Unique Solutions
Unique technical challenges imposed on potential suppliers of the Automated People Mover (APM) System for the Honolulu International Airport include the requirement of strict segregation...
Architectural Integration of APM Systems at Leonardo Da Vinci International Airport
Leonardo da Vinci International Airport is a major airport located near Rome at Fiumicino, Italy. This location has made it a popular destination for terminating flights, as well as a...
Leonardo Da Vinci International Airport APM Systems
The Leonardo da Vinci International Airport (FCO) at Fumicino near Rome has grown significantly over the past ten years and this is expected to continue. FCO is well located to serve as...
Designing APM Circulator Systems for Major Activity Centers: An Interactive Graphic Approach
An interactive graphic computer program, called Circulator, is used to design an APM circulator system for a large and complex major activity center. The design process is intuitively...
Design and Construction of the Miami Metromover Extensions
Final design, right-of-way acquisition and construction of two extensions to the existing Downtown Miami Automated People Mover, known as the Metromover, began in September 1989. Millions...
Automated Design of the Steel Box Girder Guideway for the Kuala Lumpur Downtown People-Mover
Design of the Kuala Lumpur (KL) Downtown People-Mover had to be accomplished on a fast-track schedule. The system contractor assembled a team of experts from North America and Malaysia...
Guideway Underbellies, Legs and Feet: Aesthetic Opportunities
Design aspects of APM elements that become permanent part of an urban or park setting are identified and examined. Numerous examples from operating systems and conceptual APM designs are...
Americans With Disabilities Act?Implications for APM Design
This paper provides an overview of the ADA origins, and its relationship with previous legislation, standards, and federal agencies. Key ADA requirements, as written in the DOT Final Rule,...
Return to search