Slim-Floor Beams: Design Criteria and Structural Behaviour
Partially concrete-encased steel beams are mostly employed due to their natural resistance to fire, but there may also be other reasons, e.g. to obtain smaller depths of construction....
A Simple Finnish Method for the Structural Fire Design of Composite Structures
The structural fire design of composite structures in Finland has previously been based on furnace tests, which are expensive and take too much time to arrange. With the increasing prominence...
Comparison of Simple Calculation Methods for the Fire Design of Composite Columns and Beams
There is a need for approximate calculation methods to do the fire design of composite structures. Several of such methods for composite beams and columns have been compared to find out...
Summary Report Design Session
The Tuesday presentations were devoted to design. Eight papers were presented in the morning general session and 17 presentations were made in 4 concurrent evening workshops. Diversity...
Semi-Rigid Joint Action in Composite Frames: Numerical Analysis and Design Criteria
The paper focusses on the analysis of semi-rigid composite frames, reporting mainly on the results of a research study which combines the experimental and theoretical approaches. Attention...
Columns of Concrete-Filled Rectangular Hollow Sections
Concrete-filled hollow sections are normally used as columns in multi-storey buildings and also in similar structures. Such columns may be filled with plain concrete with no need for any...
Recent Developments in Composite Bridges
Composite steel and concrete bridges are becoming increasingly popular, in particular for short and medium spans. This renewed interest is due first of all to the great freedom for creativity...
Replacement Steel Bridges for Motorway Widening
Case studies are presented of new applications of composite construction which offer speedy construction of replacement bridges over existing motorways. Spans of 45 m clear the widened...
Numerical Analysis of Composite Slab Behavior
A new calculation procedure is described which provides an alternative to full-scale testing for composite slabs with ribbed decking used in buildings. This procedure consists of combining...
Force Transfer in Composite Columns
The force transfer from steel to concrete without mechanical transfer devices in composite columns at points of load introduction is studied. A mechanism of force transfer and the factors...
Self-Cleaning Wet Wells: Definition and Design
Design guidelines for self-cleaning wet wells with variable speed pumps are given and the progress of research at Montana State University and ENSR Consulting and Engineering concerning...
Concrete Pipe for Sanitary Sewers Corrosion Protection Update
Significant advances have been made in the last decade in the area of sanitary sewer design techniques. Some of the most important advances have been in the prediction and prevention of...
Structural Design on Ductile Iron Pipe
The thickness class designation for Ductile Iron pipe has been changed to a pressure class designation in the 1991 revision of the C150/A21.50 ANSI standard. However, the same conservative...
Selection and use of Pipeline Leak Detection Methods for Liability Management into the 21st Century
Pipeline leak detection systems have been in use for many years on all types of pipelines with various products being transported. Pipeline owners and operators are subject to stringent...
Analysis and Design of Direct Burial Sections of San Diego County Water Authority's Pipeline 4 Extension
The pipeline 4 extension is one of the San Diego County Water Authority's Phase I projects that will run for about 13 miles. Majority of this new pipeline will be 96 inch in steel and...
Database for Pipeline Bridges in North America
Work began in 1985 at Wayne State University on a research study of pipeline suspension bridges. This effort, which was funded by ANR Pipeline Company of Detroit, Michigan, investigated...
Chemical Resistance of Thermosetting Resins Used for Cured-in-Place Pipe
This paper summarizes the chemistry, short term physical properties, and long term chemical resistance for representative epoxy vinyl ester, epoxy, and polyester resins that are currently...
The Design and Development of A Road/Rail Power Unit
The road/rail power unit was designed and developed by Saskatchewan Highways and Transportation to provide low cost motive power on low-density disconnected rail lines. The power unit...
Washington State Pavement Management System
This paper provides a brief overview of the Washington State Pavement management System....
PMS Implementation: Guidelines and Lessons Learned
Pavement management has emerged throughout the 1980s as an accepted tool to assist engineers in planning their pavement rehabilitation needs. Boosted by the support of the Federal Government...
Return to search