An Alternative Approach to Erosion Control and Mitigation
A case study is presented in which a sediment engineering investigation was conducted to determine the potential effects of a change in flow regulation on the channel downstream of a lake,...
Wave?Current Interaction and Sediment Transport
The paper reports on a study into whether a close relationship between the mixing (diffusion) coefficient for the sediment, ?s, and the mixing (diffusion)...
Transport of Grain-Water Mixture by Waves
The numerical modelling of the morphological changes of coastal regions is hampered by the multiplicity of empirical sediment transport formulae. The paper discusses the modes of transport...
Towards a Distinct Treatment of Incipient Motion for Bed Forms of Low Regime
The principle methods for estimating the incipient particle motion on developed bed forms in the lower regime are compared with each other. Usually only a part of the total wall shear...
The Beginning of Sediment Transport as a Probability-Problem
Sediment transport only takes place when the action of flow (shear stress, velocity) exceeds a critical value. The limit between rest and movement can be given as critical flow velocity,...
A Continuum Mechanics Approach to Loose-Bed Motion
A mathematical model is presented for simulation of loose-bed motion. The physical system is separated into two regions, a bottom region and an upper region. The bottom region is representative...
Critical Shear Stress of Armour Coat
The problem of the determination of the critical shear stress of the armour coat is important in sediment transport, river degradation and aggradation and flow discharge regulation. The...
Integral Length Scale in Sediment-Suspending Flow
The Clauser integral length scale is an adequate scaling parameter for velocity defect profiles in clearwater and sediment-suspending flows in open channels. Velocity defect profiles plotted...
Near Bed Sediment Concentration as Influenced by Turbulence
Suspended sediment concentration profiles are developed based on the conservation of mass and conservation of momentum equations of sediment laden flows. The resulting concentration profile...
Modeling Erosion and Deposition Due to Suction and Jet Flows
PHOENICS, a commercial 3-D computational fluid dynamics software package, was modified for simulating seabed erosion and deposition. Time varying sediment fluidization, transport and deposition...
Energy Relations for Suspended Sediment Transport
One of the main difficulties in predicting transport rates of suspended sediment on the basis of the Rouse-expression for relative sediment concentrations, is the lack of any reliable...
Sediment?Hyperconcentration Flow and Its Similarity Laws
The sediment- hyperconcentration flow are studied theoretically and experimentally, and the formulas for the Bingham shear stress, rigidity coefficient, fall velocity and transport capacity...
Sediment Transport Due to Turbidity Currents
The processes of sediment transport in a horizontal channel due to low-Reynolds-number turbidity currents are evaluated. A multiple-layer numerical model was developed to predict the flow...
The Effects of Velocity on Scour
Four effects of 'velocity' on scour are discussed: clear-water scour, scour by light sediment-transporting flow, mode of movement, and kinetic terms included...
Prediction of Time Development of Local Scour
The prediction of the time development of local scour is commonly solved by means of model tests. A brief description of the time-scale and the relation between the time and the scour...
Estimating Velocity and Scour in River Bends
A one-dimensional, steady-state, stream tube model was used to simulate hydraulic characteristics at a cross section. This enabled computation of higher velocities on the outside and lower...
Field Measurement of Topography at a River Mouth
The authors have been measuring topography and cross section at the river mouth of the Nanakita River, in Japan. Changes of short-time scale, such as straightening of the river channel...
Hyperconcentrations, Mud and Debris Flows?A Summary
Brief descriptions of the properties of mud and debris flow and hyperconcentrated stream flow materials and their importance to the descriptions and modeling of these flows are presented....
Flow Modeling in the Toutle River, Washington
In support of flow, suspended load, bed load, and bedform transport measurements, a quasi-three-dimensional river flow model was adapted to a reach extending from 260m upstream to 30m...
Mechanics of Mud Flows in Curved Channels with Uneven Beds
Most natural debris flows move through paths that are curved and that have significant bed topography. Owing to the dependence of the mechanics of wet debris containing substantial amounts...
Return to search