Gas Transfer at Hydraulic Structures
Field measurements of gas transfer at hydraulic structures are notoriously difficult and imprecise. A technique which measures the transfer of hydrocarbon tracer gases has been tested...
Studies of Hydraulic Jump by the Flow Routing
The high energy of floodwater passing from a reservoir needs to be dissipated to prevent scouring and damage from the dam and other downstream structures. Hydraulic jump is a common way...
Sediment Flushing Experiences at Cherry Creek Dam
An overview of the U.S. Army Corps of Engineers, Omaha District's experiences in sediment flushing operations at Cherry Creek Reservoir near Denver, Colorado is presented....
Dam Safety, Yes.; But What About Safety at Dams?
Design and construction of safe structures are the professional obligations of hydraulic engineers. However, there are environmental dangers with safe structures which engineers often...
Hydrologic Safety of Earth Dams
Hydrologic and hydraulic analyses are presented pertaining to the safety evaluation of an earth dam located downstream of another smaller earth dam. The upper dam is assumed to breach...
Hydraulic Effects on Swimming Fish in Fish Passage Structures
The implications of profile drag, weight, and buoyant forces on energy and power requirements of fish swimming through fish passage structures are considered. Where hydraulic grade lines...
Flow Through Fish Bypass Intakes
Hydraulic and computational fluid dynamic models were used to investigate the cause of the unequal intake flow distribution observed entering the three vertical intakes of the patented...
Physical Model of Local Scour at Grade Control Structures
A physical model of local scour occurring at grade-control structures was operated at an undistorted Froude number prototype-model scale ratio of 1:4. The maximum unit discharge in the...
Design of Riprapped Scour Holes for Flip Bucket and Overfall Spillways
Presented in this paper is a simple method of predicting pre-excavated scour depths and geometry for riprapped basins below flip bucket spillways. The input data needed for establishing...
New Methodology for Determining the Optimal Rehabilitation and Replacement of Water Distribution System Components
A methodology is presented for the determination of the optimal timing for the rehabilitation/replacement of water distribution system components in order to minimize costs. In this model...
Hydrodynamic Dispersion: Estimation and Prediction
The dispersion of dissolved, nonreactive tracers in groundwater is governed by diffusion and advection. A.E. Scheidegger introduced the term dispersivity to describe the effect that a...
A Numerical Solution Technique for Incompressible Flow
Presented is a numerical solution technique which employs the explicit predictor-corrector scheme of R.W. MacCormack in solving the governing two-dimensional equations of motion on a staggered...
Computer Aided Hydraulic Design of Open Channels
The results of tests by the U.S. Army Corps of Engineers District, Los Angeles (LAD), became a major part of the Corps' EM 1110-2-1601, Hydraulic Design of Flood Control Channels....
Density Currents and Their Application in Hydraulic Engineering: Task Committee Progress Report
The Task Committee on Density Currents and Their Applications in Hydraulic Engineering operates under the Technical Committee on Hydrologic Transport and Dispersion. The Task Committee...
The Physics of Sediment Transport by Wind and Water
Sponsored by a special projects committee under the guidance of the Sedimentation Technical Committee of ASCE. This collection contains noteworthy,...
Berm Breakwaters
Unconventional Rubble-Mound Breakwaters
This book presents a state-of-the-art review of the design, analysis, hydraulic model testing, and prototype experience of a new class of coastal structures that produce economical designs...
Model-Prototype Correlation of Hydraulic Structures
Forty-three papers are contained in these proceedings, from the International Symposium on Model-Prototype Correlation of Hydraulic Structures. The papers cover a broad range of subjects...
Hydraulic Fill Structures
This volume contains 53 papers covering many aspects of hydraulic fill structures with special emphasis on geotechnical issues. The papers present an excellent review of historical development,...
Hydraulic Engineering
The papers in this book were presented at the National Conference on Hydraulic Engineering, August, 1988, Colorado Springs, Colorado. The objective of this conference was to provide a...
Basis for Design of Wet Detention Basin BMP's
Two different approaches have typically been used to formulate design criteria for wet detention basin best management practices (BMP's). One approach relies upon solids settling...
Return to search