SPIDA: An Analysis and Design System for Buried Concrete Pipe
The paper presents a description of a new computerized direct design method for buried concrete pipe named SPIDA (Soil-Pipe Interaction Design and Analysis). Also the technical basis and...
Bending Moment of Underground Flexible Pipes in a Centrifuge
The effect of several factors on bending moment of an underground flexible pipe section buried in a ditch with sheet piling was investigated experimentally by means of centrifugal model...
Field Burial Tests of Corrugated Double Wall PVC Pipe
A new lightweight PVC pipe, consisting of a smooth inner wall and a corrugated outer wall, has been introduced in the U. S. sanitary sewer market in 4 through 10 in. diameters. Field burial...
Investigation of the Long-Term Creep Modulus for Buried Polyethylene Pipes Subjected to Constant Deflection
The tests reported in this paper are simulating the stress relaxation in constantly deflected pipe rings of various high density and medium density polyethylene grades. The pipe rings...
Long Term Deflection of Buried Plastic Sewer Pipes
During the 70's and the early 80's a research program has been carried out in Sweden regarding the long term behaviour of buried plastic pipes. The program has...
Determining the In-Place Density of Soils Using the Sleeve Method
The sleeve method of determining the in-place density was developed by Bureau of Reclamation field personnel for cohesionless, fine, gravel soils used for pipe bedding when other methods...
Numerical Simulation of Soil-Pipeline Interaction in a Ground Subsidence Zone
In this paper, the flexural interaction between a buried pipeline and the surrounding soil is examined by employing a combined boundary element-finite element scheme. The flexural interaction...
Field Testing of 84-Inch-Diameter Plastic Pipe
During the summer of 1981, a research project was initiated to monitor strains and deformation in 84-inch diameter RPM (reinforced plastic mortar) pressure pipe. Three 20-foot (6. 1-m)...
Large Diameter Plastic Pipe Design
This paper presents a rationale for the design of large diameter plastic pipes for gravity flow applications. This procedure, applicable for all plastic pipes, adapts state-of-the-art...
Aggregation and Consolidation of Phosphatic Clays
The consolidation behavior of aggregated phosphatic clays has been investigated using a bench scale centrifuge. It was determined that aggregation of the clays with phosphogypsum, a waste...
Thermal Plume Model for Demonstrating Compliance
A numerical model that simulates the discharge of heated water from a multiport line diffuser to a thermally stratified, flowing environment was developed. The model solves the conservation...
Hydro Power Intake Design?Criteria and Experience
This paper briefly addresses parameters to be considered in hydro power intake designs. Included are design approaches and criteria, specific examples, and applicable references. Concerns...
Intakes for Low Head Hydro Plants
The design of hydro intakes is usually based on a desire to achieve low intake losses and an acceptable approach flow distribution to the turbine. Generally, velocities in the intake canal...
Exfiltration Trench Design as Part of a Stormwater Management Plan
The paper discusses a program structured to assist the design consultant or the agency reviewer by means of a menu driven format. A flood routing microcomputer program developed by the...
Embankment Overtopping
Embankment overtopping and dam safety are major concerns of civil engineering and the general public. Very little is known about overtopping events and much less has been published or...
An Infiltration Based Runoff Model For Use With a Design Store
The feasibility of using an infiltration approach for routine runoff prediction has become a reality with the development of approximate infiltration models based on physical principles...
Velocity Distribution Factor Constraints
It has been customary to introduce the velocity distribution factors alpha and beta into the energy and momentum equations so as to avoid the integration associated with variations in...
Electronic Worksheet Applications in Hydrology and Hydraulics
Spreadsheet software packages are available for virtually all micro computers in use today. Although they are quite often thought of as business tools, their usefulness as engineering...
Automated Measurement of Soil/Water Properties
An automated data-acquisition system was constructed to permit continuous operation of laboratory equipment. The apparatus was used to monitor flow through fine-grained, 'undisturbed'...
Centrifugal Abrasion-Resistant Pumps in Intermediate Length Pipeline Systems
The success of long-distance slurry pipelines is in many cases dependent on careful preparation of the solids prior to transport. Positive displacement pumps are employed. However, for...
Return to search