Ultrasonic Flow Meter Testing
Six ultrasonic flow meters were tested in a hydraulics laboratory. Accuracies better than 2% were obtained with two transit-time meters on 14 inch diameter steel tubing. Poorer accuracies...
Power Formula for Open-Channel Flow Resistance
This paper evaluates various power formulas for flow resistance in open channels. Unlike the logarithmic resistance equation that can be theoretically derived either from Prandtl's...
Riprap Design by Modified Safety Factor Method
The Safety Factor method for designing riprap is based upon straight forward physics combining rock properties and flow characteristics. M.A. Stevens developed the method by summing the...
Analytical and Numerical Modeling at High Sediment Concentrations
Methods for classifying sediment-water mixtures according to material concentration and rheologic properties are discussed. Results from laboratory and field measurements show that bed...
Analysis of Progressive Development on Alluvial Fans
Flow on alluvial fans is considered to be somewhat unpredictable and complex, experiencing high velocities, avulsions, erosion, and deposition causing a dynamic topography with flooding...
Kinematics and Dynamics of Overland Flow
C. Y. Guo combined the kinematic wave approximation with Horton's infiltration formula to analytically solve the propagation of a two-dimensional overland flow on a previous...
Environmental Degradation of Spawning Gravels in the Tucannon River
The important relationship between upstream soil and water conservation measures and salmonid habitat conditions in the Pacific Northwest is illustrated by way of computer simulations...
Evaluation of Diffusion Models for Flood Routing
A study has been conducted to define the range of conditions with respect to hydrographs and channels encountered by SCS engineers in flood plain/flood control projects and to test two...
Drag Characteristics of Spheres in Bingham Fluids
R.W. Ansley and T.N. Smith's type of drag relation can be traced back closely, if not completely, to the Newtonian drag curve. The equivalent diameter for a sphere in a Bingham...
Hydraulic Effects on Swimming Fish in Fish Passage Structures
The implications of profile drag, weight, and buoyant forces on energy and power requirements of fish swimming through fish passage structures are considered. Where hydraulic grade lines...
An Error Analysis of the Dynamic Wave Model
The Dynamic Wave Operational Model (DWOPER) is used to forecast river stages on the Lower Columbia River. DWOPER was developed by the National Weather Service's Hydrologic...
Sintering Lunar Simulants Using 2.45 GHz Radiation
In situ sintering of lunar regolith may be useful for slope stabilization, dust control, and other applications around a lunar base. Having a knowledge of the mechanical properties of...
Use of Alkali Activation of Alumino-Silicates to Form Binders from Lunar Soil
The establishment of a permanently manned lunar base requires construction materials which can withstand the lunar environment and can be obtained from locally available lunar materials....
Lunar Oxygen Production from Ilmenite
Carbotek has developed a process for oxygen production from ilmenite-rich lunar deposits to support lunar base operations and large-volume propulsion needs. The reduction of iron oxide...
Candor Chasma Camp
This paper proposes a camp at Mars, in the Coprates region of the Valles Marineris rift, just below the equator on Candor Mensa 6�-12'S, 73�-30'W. Beginning at...
Dynamic Analysis of the Joint Dominated Beam
A method is presented herein to determine the vibration modes of the Joint Dominated Beam. An example of a cantilever beam is selected for this purpose. The truss type beam is analysed...
Differential Gravitional Forces on Large Space Structures
Effects of the differential gravitational forces have been investigated simultaneously on the orbital motion, attitude motion, and axial deformation of a very large axially flexible space...
The Planar Truss - An Active Control Test Bed
The authors have developed a laboratory planar truss and structural dynamic models which correlate well. The inherent fraction critical damping (? = .004 for the first mode) is very low...
Earthquake Engineering and Soil Dynamics II?Recent Advances in Ground-Motion Evaluation
Ground-motion determination for analysis and design of engineering structures is a shared, interdisciplinary task involving geologists, seismologists, geophysicists, geotechnical engineers,...
Hydraulic Fill Structures
This volume contains 53 papers covering many aspects of hydraulic fill structures with special emphasis on geotechnical issues. The papers present an excellent review of historical development,...
Return to search