Finite Element Analysis and Testing of a Laminated Composite Fuselage Test Structure
A test structure modeling a full scale section of a composite aircraft fuselage was designed, analyzed, fabricated, and pressure tested. The test structure consisted of a cylindrical graphite...
Flexural and Extensional Motion of Moderately Thick Laminated Composite Plates
A general theory of flexural and extensional motion of moderately thick laminated composite plates is developed for linear elastic materials and small deformation. Interlaminar stresses...
An Analytical Solution to Free Vibration Problems of Cross-ply Laminated Thin Doubly-curved Shells
Hitherto an unavailable analytical solution to the free vibration boundary value problems (b.v.ps.) of symmetric and antisymmetric cross-ply laminated thin doubly-curved shells of rectangular...
Damage Tolerance of Composites
The damage tolerance issue in composites is driven by the requirement for and implementation of a structural integrity criterion for a structural system. A key element in the design philosophy...
Failure Modes and Toughening Mechanisms in CMC
The paper reports results from stable flexural and tension tests conducted at room temperature on plain matrix and ceramic matrix composite (CMC) specimens. The flexural tests were conducted...
Coupled Bending and Twisting of Thin-Walled Composite Beams
Thin-walled open-section composite material beams of the T, I and J geometries are routinely used as stiffeners for structural components in aerospace vehicles (Starnes et al, 1985). In...
Failure Characterization of Structural FRP Bars
A combined experimental and theoretical investigation on the structural behavior of fiber reinforced plastic (FRP) bars is presented. Test results indicate that the ultimate strength decreases...
On the Design of Laminated Composite Flange: A Model with Experimental Verification
A parametric model has been developed for the optimum design of laminated composite flange. The study focuses on the evaluation and performance optimization of composite flanges with the...
Use of Laser Holography and Image Analysis for Crack Measurement and Determination of Strain Fields in Cement Based Materials
The authors have successfully used laser holographic interferometry to measure various parameters, such as crack size, crack spacing, crack opening displacement, surface displacements...
Observations of Microcracking and Pore Collapse in Limestone Using Liquid Metal Porosimetry
A technique has been developed to preserve and observe the microstructure of rock or other porous material, as they exist under stresses, using liquid metal porosimetry. Cylindrical specimens...
Acoustic Emission Source Locations in Concrete
The location of acoustic emission (AE) sources can potentially provide information on the fracture process zone in brittle materials such as concrete. Typical AE experiments generate very...
Development of a Constitutive Model for Impact Limiters
A constitutive model is being developed for 'impact limiter' materials such as aluminum honeycombs and polyurethane foams. Among other applications, these materials...
The Application of Computerized Tomography for Determining Material Properties
X-ray computerized tomography (CT) is an imaging technique that has been used by the medical community for a number of years and is well documented. However, the adaption of this technique...
Bond Strength of Reinforcing Bars in SIFCON
This paper presents a brief summary of an ongoing investigation on the bond characteristics of deformed reinforcing bars embedded in a SIFCON matrix. A significant increase in bond strength,...
Mixture Considerations for High Performance Cement-Based Composites
In the present paper, mixture considerations for producing high performance cement-based composites are discussed. Effects of different factors such as grain size and fiber reinforcement...
Experimental Techniques to Study the Microstructure of Cement-Based Materials
Techniques to identify phases and changes in microstructure within cement paste, mortar, and concrete using a scanning electron microscope and image analysis system are described. Backscattered...
Cement and Concrete Characterization by Scanning Electron Microscopy
The scanning electron microscope (SEM) is a powerful tool for the microstructural and chemical characterization of cement and concrete. Imaging techniques such as secondary electron, backscattered...
Simulation of Failure Processes in Cementitious Particle Composites
Progressive failure analysis in cementitious particle composites such as concrete requires a realistic description of the topology of the composite structure and the interaction of the...
Material Testing at High Pressure
A static test cell has been designed and fabricated to apply a peak stress of up to 2 GPa to a 2.54 cm cylindrical specimen. The cell design was based on the 'belt'...
Mechanical Behavior of Composites with Interphases
The effect of interphases on the mechanical behavior of fiber-reinforced composites is studied. Two problems, a cracked fiber in a matrix, and a fiber pulled out of a matrix, are discussed....
Return to search