ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Estimation of Spillway Free Jet Trajectory Lengths
The design of high head spillways with flip bucket terminal structures must include analysis of the length of the free jet issuing from the spillway. Prototype jet trajectory lengths are...

Using the Weir Back as an Energy Dissipator
The effect of weir back in energy dissipation is investigated experimentally and theoretically. The study includes four different shapes of weir back. The boundary friction force and the...

Design Considerations for Use of Wedge Wire Screens at Surface Water Intake Structures
This paper provides the suggested guidelines for design, construction, operation and maintenance of wedge-shaped wire cylindrical screens used for aquatic biota and trash and debris screening...

An Improved Design of Fishways Under High Variation of Headwater
For the purpose of mitigating environmental impact, it is necessary to build fish passing facilities for fish migration when a dam is constructed on a river. But when the headwater variation...

West Columbus, OH LPP Gate Closure Analysis - A Study of the Requirements for Multiple Closures
Providing flood protection by levees and/or floodwalls often requires the use of temporary closures, in lieu of the more expensive relocation of highways and railroads, in order to maintain...

What is Computational Hydraulics?
Computational hydraulics deals with methods and techniques for the numerical simulation of water flows in natural or man-made systems with the aid of computers. Flow and transport modeling...

Improved Hydraulic Features of the HEC River Analysis (HEC-RAS)
The Hydrologic Engineering Center (HEC) is in the process of developing a Next Generation (NexGen) of hydrologic engineering software. The goal in the area of river hydraulics is to develop...

MAC3D: Multiblock Numerical Model for Hydraulic Applications
The MAC3D computer code is a three-dimensional numerical model for incompressible flow. To enhance geometric flexibility, it uses multiblock grids, which are composite structured grids...

Numerical Simulation of One Dimensional Transcritical Flow
The term transcritical flow describes the existence of both subcritical and supercritical flow simultaneously within the computational domain. Transcritical flow situations are encountered...

Depth-Averaged Flow Model in Curvilinear Coordinates
Implementation of a depth-averaged model in orthogonal curvilinear coordinates permits to resolve questions about grid refinement, the representation of complicated boundaries, and the...

Hydraulic Model Studies of Recessed Curb Inlets and Bridge Drains
A large hydraulic model (64 ft long by 10.5 ft wide) was used to test several geometries of recessed curb inlets and three types of bridge drains. Testing was at 3/4 scale for the recessed...

Mixing of Thermal Discharges at Low Froude Numbers
A study was performed to develop an optimum configuration for the discharge canal of a cooling lake. The objective was to minimize the initial mixing at the end of the discharge canal,...

Use of a Modified Hybrid Model to Analyze the Effectiveness of Jetties in Reducing Marina Sedimentation
The effectiveness of the construction of jetties near the entrance channel of a coastal marina in reducing marina sedimentation has been analyzed using a modified hybrid model. The modified...

Energy Dissipation for a RCC Stepped Spillway
A two-dimensional physical model study was used to quantify the kinetic energy dissipation of the steps in a roller compacted concrete (RCC) stepped spillway. The steps were effective...

Force and Pressure Measurements in Spillway Plunge Pools
Plunge pools are often used to dissipate energy from high head spillways with flip bucket terminal structures. Conventional design of plunge pools has been based on a program of mobile...

Use of FESWMS-2DH for the Attaway Road Bridge Repair Project
The paper presents the application of the Finite Element Surface Modeling System: Two Dimensional Flow in a Horizontal Plane (FESEMS-2DH) computer program in the Attaway road bridge repair...

One- and Two-Dimensional Analysis of Flow in Hotophia Creek, MS
A numerical experiment on the influence of a sand bar encroachment on the stream flow pattern is reported. The results of a two-dimensional analysis were compared with results of an equivalent...

Factors Affecting Accuracy of Slope-Area Discharge Determination of the September 1992 Flood in Raven Fork, Western North Carolina
For the flood of September 10, 1992, in Raven Fork, Swain County, North Carolina, a peak discharge of 460 cubic meters per second was computed by using the slope-area method. Accuracy...

Roughness Coefficient in Mountain Rivers
River discharge estimations require an evaluation of the river flow resistance that generally is related with Manning's roughness coefficient. The literature suggests different ways of...

Steep Constructed Stream Channels and Chutes
Research and technology transfer needs are described for steep stream channels and chutes. Iterative processes are presented for design and construction of bouldery channels and chutes...

 

 

 

 

Return to search