Computation of a flood event using a two dimensional finite element model and its comparison to field data
This paper reports on an attempt to begin a rigorous field testing programme for two dimensional finite element flow models, examining the impacts of mesh resolution and numerical method...
Free surface flow modelling on a complex topography
The aim of this paper is to describe the different construction stages and the validation of a free surface flow model on a complex topography. This model is based on the two dimensional...
A Two-Dimensional Contaminant Transport Model with High-Resolution Upwind Schemes
High-resolution upwind schemes have become popular techniques to solve multidimensional transport problems. Based on the finite volume method (FVM), two-dimensional horizontal hydrodynamic...
Hydrodynamic Modeling of San Diego Bay
A two-dimensional vertically-averaged finite element model was adapted to study the hydrodynamics of San Diego Bay. The hydrodynamic model was interfaced with pre- and post-processors...
Modeling 3-D Ground Water Mounding
Groundwater mounding is caused by localized recharge to the saturated zone in an unconfined aquifer. Estimation of groundwater mounding shape and height is important to provide an estimate...
Development of Transport Model for Groundwater Planning and Management in Taipei Basin
The objective of this paper is to develop a groundwater model for contaminant transport simulation. The transport model, in conjunction with the previously developed flow model, is used...
Use of a Modified Hybrid Model to Analyze the Effectiveness of Jetties in Reducing Marina Sedimentation
The effectiveness of the construction of jetties near the entrance channel of a coastal marina in reducing marina sedimentation has been analyzed using a modified hybrid model. The modified...
Use of FESWMS-2DH for the Attaway Road Bridge Repair Project
The paper presents the application of the Finite Element Surface Modeling System: Two Dimensional Flow in a Horizontal Plane (FESEMS-2DH) computer program in the Attaway road bridge repair...
A Wind Driven Lake Circulation Finite Element Model for the Upper St. Marys River
The hydrodynamics of the Upper St. Marys River is simulated by a three dimensional steady state finite element model. The rigid lid and hydrostatic pressure assumptions are used in the...
Boundary Conditions and Flow Patterns in a Mountain River
Flood flow patterns in mountain valleys may be influenced by longitudinal variations in channel and valley morphology and by temporal variations in boundary conditions. This study utilizes...
3D model verification for a groyne and harbor experiment
A discussion of 3D model verification and calibration based on measurements in a flume is carried out for different test cases (groyne, harbor). The measurement data is available for public...
An Interagency Overview of Selected Stream Sedimentation Models
The author's experience in developing stream sedimentation models is presented. The interagency study consisted of three phases. Phase one involved making an inventory of the computer...
Fortification of MMOC Models for Steep-Channel Flows
The Multimode Method of Characteristics(MMOC), designed to solve unsteady flows, is a new comprehensive scheme formulated by merging several individual characteristic schemes of the specified-time-interval...
Dynamic Response of Tunnels in Jointed Rocks
We describe the application of the Discrete Element Method (DEM) to the dynamic analysis of the response of tunnels in jointed rocks to earthquake loading. In situations where large motions...
Stress Wave Loading of a Tunnel: A Benchmark Study
Five different finite element or discrete element computer codes were used to solve a sequence of problems leading to the problem of stress-wave loading of a circular tunnel in a jointed...
Modeling Bridge Abutment Stiffness for the Meloland Road Overcrossing
A simplified equivalent spring model representing the dynamic stiffness of a highway bridge abutment system is developed for use in seismic response studies. It is based on linear elastic...
System Identification of the Meloland Overcrossing Using Static and Dynamic Field Data
A system identification study was performed using a computer finite element bridge model and measured static and dynamic response data obtained from full-scale quick-release ram field...
Predicting Turbine-Generator Foundation Vibrations
Two of the major considerations in the design of large turbine-generator foundations are to maintain the proper shaft alignment and to limit the vibration of the machine during operation....
Dynamic In-Plane Racking Tests of Curtain Wall Glass Components
This paper is concerned with the seismic performance of 'architectural.' or 'non-structural' building elements such as glass elements in curtain wall systems. A pilot study was undertaken...
Recent Developments in Seismic Isolation Technology
Large experimental research projects for isolators for both civil structures and nuclear reactor applications have been conducted at the Earthquake Engineering Research Center (EERC) over...
Return to search