Political and Institutional Constraints on Water Resources Studies
Urban water resource planning studies are conducted by the U.S. Army Corps of Engineers at the request of a local sponsor, frequently in order to address a specific problem. The public...
When to Connect Your New Supply
The use of risk analysis is important to a water utility. The economic losses to the local economy as a result of water shortages can be astronomical. On the other hand, the high rates...
Applying Benefits-to-Costs Analysis for Stormwater Improvement Projects
Benefit-to-cost analyses provide a measure of evaluation for the justification, selection, and prioritization of stormwater improvement projects. Facing increased competition for tax dollars...
Source Identification and Ranking of Wet Weather Discharges in an Urban Area
A study has recently been completed to characterize the pollutant loadings to the Providence River, RI during wet weather conditions. A total of 11 land based sampling stations including...
Levee Failure at Elba, Alabama
In March 1990, flooding resulted in levee failure at Elba, Alabama. The levee project was constructed in 1938 by the Works Progress Administration to provide protection to the city from...
Finite Element Studies of Block Shear for Structural Tees
Structural tees are commonly used as tension members. As a first step toward testing the adequacy of the current design codes for net section and block shear failures near the connections...
Stochastic Finite Element-Based Reliability Analysis of Dynamically Loaded Frames
This paper presents the use of the Stochastic Finite Element Method (SFEM) for reliability analysis of steel frames subjected to dynamic loading, in the context of modal superposition....
Minimum Required Lateral Stiffness of Structures
In this paper an approximate method is presented to calculate the minimum lateral stiffness required to insure global structural stability. The technique is based on setting the critical...
Limit and Post-Limit Behavior of Space Trusses
A numerical technique for the nonlinear analysis of space trusses taking into consideration such factors as load-eccentricity, initial crookedness of the member and nonlinear stress-strain...
A Kinematic Hardening and Softening Model of Concrete
In the present paper, a new loading surface calibrated by several typical uni- and multi-axial test curves is proposed. Following the associated flow rule, a relatively simple constitutive...
Inelastic Mechanisms in Dynamically Loaded Ceramics
The dynamic response of ceramic materials has been the subject of intense research in the past decade. In this paper, we succinctly describe a plate impact experiment of a star-shaped...
One Surface Model for Concrete with Non-Associated Damage Rule
The general formulation of a continuum theory for the inelasticity of concrete is derived. The internal theory of thermodynamics is used and the dissipation inequality is established....
Wave Loading Linearization for Offshore Structures
The linearization of Morison-type wave loading is to replace u|u| by cu, where u is a zero mean, stationary Gaussian random process and c is a constant. In the present study an optimal...
Myocardial Wall Stress: A Clinician's View
Definition of left ventricular (LV) wall stress is a parameter which has a valid application in clinical medicine. This paper discusses this application as it pertains to various cardiac...
Diastolic Function Using 3-D Echo Reconstruction and Finite Element Analysis: Applications for Study in Animal Models and Patients
We have initiated animal experiments using three-dimensional reconstruction of echocardiographic recordings and finite element analysis to evaluate the effects of alterations in preload,...
Large Deformation Analysis of Cardiac Structures
The finite element technique can be used to simulate the response of the cardiac structures that have complex shape and geometry and nonlinear material properties. This paper enumerates...
Three-Dimensional Finite Element Analysis of Stress and Activation in the Heart
A finite element (FE) method has been developed for three-dimensional (3D) analysis of stress distributions and activation patterns in the left and right ventricles of the canine heart....
Structural Aspects of Femoral Head Osteonecrosis
Orthopaedic management of early stage osteonecrosis (ON) of the femoral head is aimed at delaying or preventing collapse of structurally weakened regions of repairing dead bone. The advent...
Finite Element Stress Analysis of a Spinal Segment
A large number of factors need to be determined to understand the biomechanics of a surgical procedure about the lumbar spine. Some of these factors are amenable to experimental investigations...
Simulation of Head/Neck Response to -Gx Impact Acceleration
The Articulated Total Body (ATB) model has been developed to predictively simulate the head and neck response by specifying a 2-segment/2-joint system driven at the anatomical thoracic...
Return to search