Design of Underground Repository Openings in Hard Rock to Accommodate Vibratory Ground Motions
A methodology and preliminary application for designing repository openings to withstand vibratory ground motions is presented. The methodology first establishes the design basis ground...
Block Dynamics Modeling in Support of Seismic Design
The behavior of an underground excavation is usually characterized by stresses and displacements which develop around the excavation as a result of prevailing field conditions. For conventional...
Seismic Design of Circular-Section Concrete-Lined Underground Openings?Preclosure Performance Considerations for the Yucca Mountain Site
Yucca Mountain, the potential site of a repository for high-level radioactive waste, is situated in a region of natural and man-made seismicity. Underground openings excavated at this...
Seismic Considerations in Sealing a Potential High-Level Radioactive Waste Repository
The potential repository system is intended to isolate high-level radioactive waste at Yucca Mountain according to the performance objective - 10 CFR 60.112. One subsystem that may contribute...
Options for Dynamic Analyses of Underground Facilities
Continuum and discontinuum modeling techniques for conducting dynamic analysis of underground facilities of geologic repository are discussed. Compared with continuum analysis, the discontinuum...
Dynamic Response of Tunnels in Jointed Rocks
We describe the application of the Discrete Element Method (DEM) to the dynamic analysis of the response of tunnels in jointed rocks to earthquake loading. In situations where large motions...
Design and Performance Requirements for Surface Facilities of a High Level Nuclear Waste Repository
This paper describes three important steps in the design process of repository surface facilities: (1) Establishing performance requirements and risk levels, (2) translating performance...
Guidelines for the Development of Natural Phenomena Hazards Design Criteria for Surface Facilities
This paper discusses the rationale behind the guidelines, criteria, and methodologies that are currently used for natural phenomena hazard design and evaluation of DOE nuclear and non-nuclear...
Engineering: Environmental vs. Developmental Goals
The 1992 winner of the Daniel W. Mead Student Paper competition explores the potential conflict for engineers, between environmental and developmental goals. Noting a dictionary definition...
Seismic Design Criteria for Transporation Structures
Presented is a discussion focusing on two critical issues which must be resolved when setting seismic design criteria for important transportation structures such as those supporting elevated...
Wind Engineering?Engineering for Wind Damage Mitigation
The establishment in 1970 of a new engineering discipline, wind engineering, was motivated by property damage caused by windstorms of 1970 known as the Lubbock Tornado and Hurricane Celia....
Controlling the Seismic Behavior of Precast Concrete
Precast concrete has, through the years the years, acquired a bad reputation insofar as its ability to withstand earthquake is concerned. This reputation, though reasonably based, is not...
Analytical Platform Development for Precast Structural Systems
The multi-investigator PRESS (Precast Seismic Structural Systems) research project requires an analysis tool that can be used to perform nonlinear seismic analyses of a wide variety of...
Design Criteria for Seismic Connections in Precast Concrete
The seismic behavior of precast concrete is contrasted with that of cast-in-place and the conditions that precast must satisfy are reviewed. Design criteria and possible strategies for...
Ductile Connections for Precast Concrete Frame Systems
This paper describes a research program to investigate the behavior of ductile connections between precast beam-column elements. The objectives of the program are to provide rational design...
Seismic Performance Behavior of Precast Concrete Beam-Column Joints
The experimental test program being conducted at the National Institute of Standards and Technology on 1/3-scale model precast concrete beam-to-column connections is summarized. The objective...
Seismic Response of Average High-Rise Building Structions in Japan
Dynamic characteristic models, representing average high-rise building structures in Japan, have been established through the regression analyses utilizing review documents of seismic...
Simulated Earthquake Ground Motions for Design Purpose
In this paper, firstly, it was clarified that there is a case where in the long-period range there is seen a tendency to follow the ?+-2$/ model approximately while in the short-period...
Safety Enhancement of Bridges with Seismic Isolation Bearings
This paper summarizes the experimental and analytical studies done at Dept. of Civil Eng., Kyoto Univ., on application of base isolation bearings to highway bridges and the Menshin (base...
Buildings with Response Control Systems in Japan
Today, there are more than 30 buildings with response control systems. The system is defined as one that suppresses or controls the response to the vibrational motion input of the buildings,...
Return to search