Optimal Strategies for Design, Inspection, and Repair of Fatigue-Sensitive Structural Systems Using Risk-Based Economics
The fatigue reliability and maintainability process for a marine structure (caisson platform) is studied. Reliability analysis, performed by Monte Carlo, quantifies the improvement in...
Redundancy Evaluation of Steel Girder Bridges
The focus of this paper is on the use of redundancy measures in the evaluation of bridge systems. The emphasis is on the definition of system redundancy measures suitable for use by bridge...
Comparison of a Practical Fragility Analysis of a Reactor Building with Non-Linear Monte Carlo Simulation
There are several conventional methods to assess seismic safety of nuclear power plants practically. In these methods, non-linear effect of the structural elements is considered with an...
The Nessus Software System for Probabilistic Structural Analysis
The Probabilistic Structural Analysis Methods (PSAM) project developed at SwRI integrates state-of-the-art structural analysis techniques with probability theory for the design and analysis...
Verification of NESSUS Code on Space Propulsion Components
Application of probabilistic finite element method to the structural analysis of typical space propulsion components such as turbine blades and high pressure ducts is reported. The study...
Recent Advances in Structural Rehabilitation Techniques for Underground Sewer Pipelines
A great challenge for the coming years, if not decades, will be the repair, renovation and renewal of the existing sewerage systems in the Federal Republic of Germany in the interest of...
Valve Control to Avoid Column Separation in a Pipe
Maximum pressures in a pipeline can be reduced significantly by closing the valve in an optimal manner. Such an optimal valve closure policy may result in some situations in minimum pressures...
Measured Performance and Numerical Analysis of Buried Pipe
This study shows that the behavior of a soil pipe system can be assessed by a nonlinear elasto-plastic finite element analysis. The results of numerical calculations are compared to the...
FE Elastic Analysis of Measured Earth Pressure on Buried Rigid Pipes in Centrifuged Models
FE elastic analyses of earth pressure on buried rigid pipes yielded results that agreed well with the earth pressure measured in 42 centrifuged models, confirming both the reliability...
The Effect of Compaction on Buried Flexible Pipes
This contribution presents an analysis of the installation of flexible pipes in granular soil. The deformation of the pipe cross section is measured in field and laboratory tests. It is...
A Proposed Methodology for Validating Performance Assessment Models for the DOE Office of Civilian Radioactive Waste Management Program
The Department of Energy (DOE) has developed a draft methodology for validating performance assessment models that will be used in the licensing of high-level waste repository systems....
A Numerical Study of Some Effects of Nuclear Fuel Waste Vault Construction and Closure on Evolution of Groundwater Flow Paths in the Geosphere
We have performed a series of three dimensional finite-element simulations on the sensitivity of the groundwater flow paths and travel times in a conceptual hydrogeological model with...
A Stratified Percolation Model for Saturated and Unsaturated Flow Through Natural Fractures
The geometry of the asperities of contact between the two surfaces of a fracture and of the adjacent void spaces determines fluid flow through a fracture and the mechanical deformation...
The Analysis of Horizontal Cooling Enhancement for Nuclear Waste Container Emplacement
This paper presents a novel method for distributing the heat generated by waste containers emplaced in the proposed high-level nuclear waste site at Yucca Mountain, Nevada. The method...
Optimization Method for Dimensioning a Geological HLW Waste Repository
This method was developed by the CEA to optimize the dimensions of a geological repository by taking account of technical and economic parameters. It involves optimizing radioactive waste...
Trends in Waste Management Program Costs: An Evolution of Estimating Methods and Results
The purpose of this paper is to present a summary of how the program cost projections contained in the five TSLCC analyses performed to-date and the estimating methods used to make these...
Application of Geophysical Methods for Fracture Characterization
One of the most crucial needs in the design and implementation of an underground waste isolation facility is a reliable method for the detection and characterization of fractures in zones...
Dispute Resolution ? A New Approach for Public Acceptance of the High-Level Radioactive Waste Mamagement Regulatory System
This paper examines the feasibility of utilizing Dispute Resolution to significantly reduce the numbers of technical disputes subject to litigation in civil courts or before the NRC to...
The Public Consultation Program on Nuclear Fuel Waste Management in Canada
Atomic Energy of Canada Limited has conducted a public consultation program (PCP) with public interest groups broadly representative of Canadian society to identify the issues of public...
Beyond NEPA: A Look at Socioeconomic Impact Assessments Required Under the Nuclear Waste Policy Act, as Amended
The Department of Energy's Office of Civilian Radioactive Waste Management (OCRWM) has been charged by Congress, through the Nuclear Waste Policy Act, as amended (the Act),...
Return to search