Seismic Practices for the Air Transportation System: Evolution and Needs
The seismic performance of air transportation systems is reviewed. The evolution of seismic design criteria and practices for major air transportation system elements is discussed. The...
San Francisco Double-Deck Viaduct Retrofits
Following the Loma Prieta Earthquake in October 1989, six double-deck reinforced concrete viaducts in San Francisco were closed because of some isolated damage, and as a precaution for...
Retrofitting Northwest Connector for Seismic Forces
Many pre-1971 bridges in California have inadequate seismic resistance due to non-ductile components or poor connectivity of superstructure elements. Caltrans has finished the first retrofit...
Lifeline Design of Bridges
An analysis and design procedure is presented for retrofitting steel girder bridges that may experience the loss of a pier or column. Multispan and continuous grider bridges are treated....
Scenario for Improving the Seismic Resistance of Pipelines in the Central United States
A number of pipelines transporting crude oil and natural gas to the Midwest and Northeast pass within and adjacent to the New Madrid seismic zone in the central United States. A major...
Telecommunications Facilities Earthquake Readiness Since San Fernando
The vertical rack architecture of telecommunication offices showed some weaknesses during the San Fernando earthquake in 1970. Efforts have been made since then to improve performance...
Seismic Analysis and Design of Buried Piping
Among the causes of damage to buried pipelines due to earthquakes, the one that is most complicated to analytically deal with and that is most credible at safety related sites such as...
Finite Element Analysis of Three-Way Joint of Buried Pipelines Under Earthquake Loads
A quasi-static finite element procedure for the stress analysis of three-way joint of buried pipelines under earthquake loads has been established by quasi-conforming thin circular cylindrical...
Seismic Analysis of Buried Pipelines Subjected to Vertical Fault Movement
Earthquakes have demonstrated the vulnerability of buried pipelines, mainly to 'non-dynamic' seismic deformations of the ground, such as liquefaction, landslide...
Reliability of Highway Bridge Columns Under Earthquake Loading
Seismic design procedure for highway bridges normally specify that any inelastic action be confined to the columns. Concrete bridge columns are usually designed to resist an elastic force...
Seismic Design Criteria for Transportation Structures
Seismic criteria for the design of transportation stuctures have evolved slowly since their inception in the early 1940s. Although seismic design criteria are far more sophisticated than...
Understanding the Earthquake Environment, Corporate Strategies
Corporations should understand the impact that earthquakes may have on their ability to function. Some earthquake related issues which face a corporation are: earthquake design levels...
Stochastic Responses of Lifeline Systems Under Seismic Excitations
A wave superposition model is proposed to predict the field motion on the basis of the seismic records obtained from a strong motion array. By assuming the ground motion to be a homogeneous...
Seismic Analysis and Design of RC Lifelines
This paper describes the general approach for analyzing a soil-reinforced concrete lifeline system subjected to seismic loading, and the development and importance of transfer functions...
Elevated Water Tank Inelastic Seismic Analysis
In 1988, the Seattle Water Department hired CYGNA, a consulting firm, to assess the seismic reliability of their water system, since major earthquakes can occur in the area. Their study...
Collapse of the Cypress Street Viaduct
This paper is being presented by the Division of Structures, Post EarthQuake Investigation Team (PEQIT) on the collapse of the Cypress Street Viaduct in the City of Oakland, California,...
Lateral Load Test on Driven Pile Footings
The October 17, 1989 Loma Prieta earthquake provided an ideal time and situation to perform for the first time, at no installation cost, a full scale lateral load test on a group of driven...
Inductive Loop Detection/Testing with DSP Techniques
Vehicle traffic control is recognized as an effective way to relieve mounting traffic congestion in large urban areas across the country. The most common method of vehicle detection is...
Automatic Vehicle Classification System
China has recently completed a number of freeways, all of which were financed in part by the Ministry of Communications and local governments and in part by loans from the World Bank,...
Analysis of Automatic Vehicle Identification Technology and Its Potential Application of Florida's Turnpike
The Florida Department of Transportation contracted with the Center for Urban Transportation Research (CUTR) at the University of South Florida to conduct an analysis of automatic vehicle...
Return to search