Lattice Tower Design Using Cold-Formed Shapes
The use of cold-formed shapes in lieu of hot-rolled angles may lead to major changes in the design of lattice transmission towers. The design procedure of the new shapes is more creative,...
Cold-Formed Angles for Transmission Towers
Cold-formed members enable the engineer to design transmission towers that may be more cost-effective than those built with hot-rolled angles. Members can be designed to closely fit the...
Design and Test of Cold Formed Steel Members
Latticed systems represent the most spread and low-cost solution for electrical trasmission towers, when ground conditions do not affect the design choice. Steel angles have been used...
Bolted Connections for Steel Towers
Laced electrical transmission towers require on-site assembly. Consequently, the number of bolts and pieces are important considerations in the total cost of the structures. ASTM A394(1)...
Strain Gaging and Data Acquisition at the TLMRF
Strain gages are the major source of data for the TLMRF (Transmission Line Mechanical Research Facility) research program. Measurement of member loads and bending moments in lattice towers...
Special Pile Foundations for a Coastal Permafrost Site
The design of the plant's foundations had to address several challenging geotechnical conditions. These included (1) 'warm' (close to 32 degree F)...
Adfreeze Strength of Ice to Steel Pipe Piles as a Function of Temperature
A study was initiated to determine the adfreeze bond strength between steel pipe piles and freshwater ice as a function of temperature. Tests were conducted at an average strain rate of...
Building Foundation on Thawed Soil and Permafrost
The site of a planned 10,000 square foot State Youth Facility in Bethel, Alaska was found to be underlain by discontinuous permafrost. This paper describes the geophysical and geotechnical...
35-Year-Old Foundations, Thule Air Base, Greenland
In February 1951 the secret project 'Blue Jay' to construct the base began. Timber piling were used in the foundations of boilers, generators, and other heavy...
Repair Welding of Arctic Offshore Structures and Vessels
This paper describes the welding procedure development for repair or field modifications of offshore drilling structures and vessels made with several different steel grades produced for...
Bearing Capacity Calculations for Piles in Permafrost
Small-scale model piles frozen in various soils were tested at constant rates of displacement and constant load. The derived values were used to calculate the maximum allowable stress...
Sheet Pile Interlock Behavior: A Moving Contract Problem
The finite element method is used to analyze the behavior of sheet pile interlocks subjected to an uniaxial pull test. The thumb and finger of the interlock provide three contact points...
Response of Eccentrically Braced Tall Buildings
The inelastic dynamic response aspects of tall steel buildings with eccentric K-bracing and eccentric X-bracing systems are examined, when subjected to factored El-Centro and computer...
Experience With Workstation-Based Design of Steel Structures
An example is presented of an interactive graphical structural analysis and design system suitable for individual-user workstations. The experience of a corporate engineering services...
Interactive Computer Graphic Seismic Design of Frames
An interactive computer graphics approach for earthquake resistant design of two and three-dimensional steel frames is presented. Analysis and design are possible from code-related equivalent...
How To Design Highway Retaining Walls?A Practical Application of CADD
The recent work developed at the University of Missouri-Rolla (UMR) including optimization algorithms and two computer programs, ODSEWS-2D-II and ODRESB-3D are discussed. Several numerical...
A Problem Oriented Courseware Interface
A program has been created in an attempt to utilize the benefits of the microcomputer in assisting the learning process without invoking the attendance 'black-box'...
Interactive Structural Analysis and Steel Design on the Macintosh
A program has been written for the analysis of two-dimensional structures for the Macintosh personal computer using the Microsoft Basic language. The program takes advantage of the special...
The Mexican Earthquake: A Firsthand Report
The Mexican earthquake of September 19, 1985 was most peculiar, because of the combination of its intensity, regularity, and duration. No other earthquake has had an intensity of IX, at...
Tiedback Walls Untie Intersection
The intersection of Gallows Rd. and Arlington Blvd. in Virginia's Fairfax County required separation. Tiedback retaining walls, which required only 18 in. instead of the 18-22...
Return to search