A Materials Study of Interleaved Bismaleimide Composites
One approach for improving damage tolerance in epoxy based composites involves interleafing of tough adhesive layers between plies of the composite prior to fabrication. Extension of this...
Resin Transfer Process Modelling: Computational & Experimental
In most cases, the resin transfer molding (RTM) researcher has a fundamental understanding of composites and possibly some mold design experience. The areas of resin flow dynamics and...
Compressive Strength Relationship Between Cylinder Tests and Core Tests
A core obtained from any field cured structural member will be inherently different than the field cured cylinder used as a control. Consequently, comparisons with field cured cylinders...
Maturity and Pullout for High-Strength Concrete
As with other types of concrete mixtures, construction with high-strength concrete requires assurance that sufficient levels of in-place strength are reached at specific times. An experimental...
Effects of Physicochemical Factors on Asphalt Aging
A new model for asphalt oxidative aging is presented. The model proposes that the kinetics of low temperature aging in the pavement temperature range is largely governed by physicochemical...
Asphalt Age Hardening?Trends and Predictions
Pavement cracking is substantially related to the consistency of asphalt cement binders. The variation in hardness of binders is related primarily to asphalt characteristics, environment...
Asphalt Changes in Drum Dryer and Batch Operations
The study was designed to determine whether steam distillation of asphalt takes place in a drum dryer mixer by comparing changes induced by various laboratory conditioning (aging) techniques...
Combined Compression-Shear Experiments on Mortar-Aggregate Interfaces
Material interfaces between matrix and aggregate particles in cementitious composites such as concrete are considered to be a very important component of the material microstructure, which...
Applications of Wood Materials for Innovative Bridge Systems
This paper describes completed research and the status of research underway on timber bridges that are part of the USDA Forest Service timber bridge initiative. The initiative includes...
Rate Effects in the Deformation of Rocks
This paper gives a brief review of creep and rate effects on the behavior of rocks, within a wide range of confining pressures and temperatures, and with a special emphasis on the physical...
A Microplane Constitutive Model for Soils
A microplane model for the inelastic behavior of soils is presented. The microscopic constitutive equations are defined independentely for a set of microplanes covering all possible orientations,...
Improved Prediction of Masonry Durability Through Advanced Materials Science Methods
Several trends in the use of materials in civil engineering have made it imperative to improve the ability to predict the durability of masonry. This will require more emphasis on materials...
Asphalt Cement Specifications and HMA Performance
The standard specifications generally used for hot mix asphalt (HMA) are those published by the American Society for Testing and Materials (ASTM) or the American Association of State Highway...
Are ASTM Standards Enough?
ASTM (American Society for Testing and Materials) is most likely the World's most renown developer of voluntary consensus standards. Its standards development process utilizes...
Spectral Techniques for Serviceability and Durability Assessment of High-Performance Construction Materials
Using spectral techniques, one can obtain the frequency content of a material specimen. Spectral measurements were made on specimens of Portland cement and a polymer based materials. In...
Material Properties Related to Pavement Performance
As part of the Strategic Highway Research Program, an effort has been made to review research literature which can be used to relate asphalt properties to pavement performance. This report...
Relationship Between Laboratory Aging Tests and Field Performance of Asphalt-Concrete Mixtures
Aging of asphalt mixtures is primarily associated with loss of volatile components and oxidation in asphalt during the construction phase (short-term aging), and progressive oxidation...
Innovative Uses of Polymer Concrete
Polymer concrete (PC) was developed in the 1950s. The material became more widely known in the 1970s when it was used for the repair of portland cement concrete. Polymer concrete is significantly...
Load-Deflection Performance of FRP Molded Grating
This research project deals with fiberglass reinforced plastic (FRP) molded grating, its properties, manufacturing materials used and appearance. Grating strength, configuration, weight...
Shear Properties of Pultruded Glass FRP Materials
The in-plane shear modulus and the in-plane shear strength of a variety of pultruded glass fiber reinforced plastic (FRP) materials were measured experimentally in a pilot test program...
Return to search