Buried Structural Capacity of Insituform?
In July 1988, a test was conducted at Utah State University to determine the structural support that can be provided to a failing rigid pipe system through the use of the Insituform process....
Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...
Pipeline Leak Detection and Location
A real time pipeline leak detection and location system has been developed. This system consists of a numerical model for transient flow, two sets of pressure and flow measurement equipment,...
Combined Load Testing of Prestressed Concrete Cylinder Pipe
A series of combined load tests were run on prestressed concrete cylinder pipe in order to evaluate a proposed new method of design for pipe made to AWWA Standard C301. These tests involved...
Evaluation of Combined Load Tests of Prestressed Concrete Cylinder Pipe
Combined load tests of prestressed concrete cylinder pipe, presented by Tremblay in the proceedings of this conference, are analyzed. Data gathered during the tests includes first visible...
Designing Vitrified Clay Pipe Systems with EASE
NCPI has developed a computerized trench load design program which provides a broad and complete spectrum of design options which will enable engineers and contractors to safely design...
Structural Safety and Reliability
This proceedings of the 5th International Conference on Structural Safety and Reliability (ICOSSAR '89) held on August 7-11, 1989 in San Francisco, California contains almost...
Approach to Developing a Ground-Motion Design Basis for Facilities Important to Safety at Yucca Mountain
The DOE has proposed a methodology for developing a ground-motion design basis for prospective facilities at Yucca Mountain that are important to safety. The methdology utilizes a quasi-deterministic...
Concepts in Prototype Testing for In Situ Geomechanical Investigations at Yucca Mountain
Geomechanical investigations comprise a significant portion of the site characterization program to be conducted at Yucca Mountain, the site of a proposed repository for nuclear waste....
Hydrologic Characterization of Faults and Other Potentially Conductive Geologic Features in the Unsaturated Zone
The capability of characterizing near-vertical faults and other potentially highly conductive geologic features in the vicinity of a high-level-waste repository is of great importance...
Willingness to Pay for Stormwater Infrastructure
The contingent valuation method is used to estimate the willingness of Baltimore County homeowners to pay for stormwater controls to reduce nutrient loadings to the Chesapeake Bay. Homeowner...
Restoration of a Buttress Dam
Inspections of Morris Shepard Dam on the Brazos River in Texas revealed serious defects in the dam and its foundation. Piezometric pressures below the spillway buttresses greatly exceeded...
Applications of Probability Matrix Methods for Texas Reservoirs
Probability matrix methods are a class of procedures which were generally developed from P.A.P. Moran's Theory of Storage. In essence, probability matrix methods are a means...
InTransit: Processing and Analyzing Transit Service Data with the Macintosh
InTransit is a database application based on 4th Dimension designed to facilitate the data processing and analysis phases. InTransit, in its present form, can process both ridecheck and...
Resistance Coefficient in a Tidal Channel
In applying a numerical hydrodynamic model to the tidal channel-lagoon complex around Great Sound, New Jersey, it became apparent that the model guidelines for the resistance coefficient...
Eutrophication and Recurrent Hypoxia in the New York Bight: A Synthesis of Historical Data and a Numerical Model of the 1976 Anoxic Event
As a result of oceanographic programs conducted over the past four decades, a large historical data base is available, and has been used, to document areas of recurrent hypoxia and high...
Pipeline Design and Installation
The proceedings of the International Conference on Pipeline Design and Installation, held on March 25-27, 1990 in Las Vegas, Nevada, presents information on all aspects of pipeline design...
Sprinkler System Design for Frost Protection
Both undertree and overtree systems for frost protection by sprinkling are currently being used. The criteria based on experimental results and theoretical modeling have been reviewed...
A Modern Approach to the Design of Grassed Channels
The design of grassed channels can be based on modern fluid mechanics principles. The resistance to flow in a grassed channel is linked directly to the relative roughness of the flow through...
Strategies to Reduce Salt Load in Drainage Water
A study of irrigation efficiency, drainage flow and trace element loading in the drainage water from a 14000 ha irrigation district on the west side of the San Joaquin Valley of California...
Return to search