A Comparative Study of Different Steel Fibers in Shotcrete
Two steel fiber reinforced shotcrete (sfrs) test programs have been carried out in eastern Canada using steel fibers which are available in the north American marketplace. The first program...
Modeling Beam Torsion in Prestressed Concrete Box Beam Bridges
This paper briefly summarizes the development of a specialized finite element model capable of predicting the elastic and inelastic behavior of beam-slab type prestressed concrete spread...
GT BEAM ? An Interactive Graphic Beam Analysis Program for Education
An interactive beam analysis program called GT BEAM, that has been developed at Georgia Tech for use in undergraduate mechanics courses, is presented. The development objectives of the...
Dynamic Analysis of Beams on a Pasternak Foundation
Since many years pavement engineers apply very simple statical models to analyze their specific problems. The development of numerical tools and easily available computer power make much...
The Use of Numerical Rule Processors in Engineering Calculations
A Numerical Rule Processor uses a declarative approach to the processing of engineering calculations. The rules which link the parameters are set out in a separate rule base and the order...
Dynamic Study on New Guideway Structure for JR Maglev
This paper presents an introduction of the study for the design and technical development of a newly proposed guideway structure for the superconductive magnetically levitated train system...
New Canadian Provisions Related to the Design of Composite Beams
In this paper, the new provisions in CAN/CSA-S16.1-M89 for the design of composite beams, together with reasons for changes, are discussed. Some of the new provisions reflect results of...
Composite Beams: Redistribution, Reliability, and Lateral Buckling
Research relevant to three aspects of the design of composite beams for ultimate limit states is summarized. These are: the redistribution in continuous beams and in framed structures...
Two Full-Scale Tests of Class 3 Composite Beams
This paper presents two tests of continuous composite beams comprising two 7.5 m spans and two concentrated loads close to the intermediate support. Although the cross-sections on the...
Shear Connection in Composite Beams
This paper considers the influence of the shape of the deck profile on the shear connection of composite beams. It was found that the existing strength reduction factor can be unconservative...
Serviceability Stress Limits for Composite Beams
Serviceability limits are increasingly becoming the critical design requirement for composite beams. A set of three illustrative design studies indicates that this is particularly true...
Composite Space Frame?Experimental/Analytical Study
This paper describes work carried out on a composite space frame system. The system, previously developed for roof construction, comprised a pyramidal arrangement of steel angles and circular...
Slim-Floor Beams: Design Criteria and Structural Behaviour
Partially concrete-encased steel beams are mostly employed due to their natural resistance to fire, but there may also be other reasons, e.g. to obtain smaller depths of construction....
Comparison of Simple Calculation Methods for the Fire Design of Composite Columns and Beams
There is a need for approximate calculation methods to do the fire design of composite structures. Several of such methods for composite beams and columns have been compared to find out...
Design of Shear Connectors in Composite Bridge Beams
A new approach is described for the design of stud shear connectors, in composite steel and concrete beams that are subjected to vehicular loads, which allows for the interaction between...
The Steel Deck Institute Method for Composite Slab Design
The Steel Deck Institute (SDI) of the USA has synthesized the composite slab research and testing that has been conducted in the U.S. during the past 25 years and has presented a design...
Cyclic Lateral Load Analysis of Composite Frames
A method of analysis for composite building frames subjected to repeated and reversed lateral loads has been developed as part of an overall investigation of seismic response of composite...
Ductility Effects of End Details in Composite Beams
A limit states criterion is described for quantifying the rotation capacity of members in indeterminate structures as a means of classifying ductility of structures during plastic behaviour...
Seismic Response of Composite Coupled Walls
In many structures, height restrictions may require coupling of reinforced concrete walls by structural steel beams rather than conventional reinforced concrete beams. Through an experimental...
Connection of Beam Flange to Concrete-Filled Tubular Column
Research has been carried out on a frame composed of a concrete-filled steel tubular column and H-shaped steel beam with the aim of developing a reasonable connection method. The proposed...
Return to search