Powering Your Electric Vehicle: Affordability Starts with Properly Engineered Geomembrane Liner Systems
Lithium is a vital battery component, and lithium-ion batteries are especially interesting because in addition to being rechargeable, they present a high-energy density and low self-discharge, which means...
Intelligent Geo-Construction Drilling Equipment: Delivering More Than Meets the Eye
The complexity, risk, and demands of engineered geo-structural projects have increased, seemingly exponentially, through the years. Physical and capital resources to deliver such projects, however, have...
Taxis, Elevated
A new private vehicle transportation service is in the works that will fly passengers across cities at up to 200 mph using electric vertical take-off and landing vehicles....
Journal of Transportation Engineering, Part B: Pavements
The Journal of Transportation Engineering, Part B: Pavements will contain technical and professional articles on the planning, design, construction, maintenance, and operation of airport, roadway and other...
Applying Scanning Technology to Tunnel Inspections: Leveraging Technology to Reduce the Public Agita
A large number of transit and vehicular tunnels in the New York Metropolitan area were inundated by the tidal surge caused by Super Storm Sandy on October 29, 2012. The storm created major...
Small Projects are Big Deals
Geotechnical engineers work on a wide array of projects, ranging from small retaining walls or pavement projects, to construction of dams, canals, and foundations for bridges and high-rise...
Introduction
Many institutions and private industry organizations have prepared guidance documents with the latest scientific and engineering information on proper design, installation, maintenance,...
Design Considerations Common To All Permeable Pavements
Impervious cover in watersheds without controls result in increased stormwater runoff and decreased groundwater recharge in response to rainfall events. This increased runoff can be the...
Porous Asphalt and Permeable Friction Course Overlays
Porous asphalt typically consists of conventional warm mix asphalt (WMA) or hot mix asphalt (HMA) with significantly reduced fines resulting in an open-graded mixture that allows water...
Pervious Concrete
Pervious concrete consists of a hydraulic cementitious binding system combined with an open-graded aggregate to produce a rigid pavement with typically 15% to 25% interconnected void space....
Permeable Interlocking Concrete Pavement (PICP)
Permeable interlocking concrete pavement (PICP) consists of (impervious) manufactured concrete units that form permeable voids and joints, when assembled into a laying pattern. The openings...
Grid Pavement
Open grid pavements consist of concrete or plastic units with large surface openings filled with a permeable joint material, typically small aggregate (ASTM No. 8 or No. 89), sand, or...
Alternative Technologies
In recent years, new permeable pavement product variations have entered the market. This chapter describes general characteristics for several emerging products. The following types of...
Achieving Success and Avoiding Failures with Permeable Pavements
This chapter provides experienced-based recommendations on how to achieve success with permeable pavements. This information is based on an informational survey completed by designers,...
Maintenance
While site selection and proper construction are the most critical factors in establishing that permeable pavements function as designed, all must be inspected and maintained to maximize...
Appendix A: Common Concerns Regarding Permeable Pavements Fact Sheet
Back matter pages come after the papers or chapters in a published work. This back matter contains common concerns regarding permeable pavements fact sheet....
Hydrologic and Hydraulic Design Methods
Computational methods for hydrologic analysis, hydraulic functions, and treatment capacity of permeable pavements vary depending on the complexity of the design and level of detail in...
Permeable Pavement Research Needs
The implementation of permeable pavement installations and practices are expanding and becoming more commonplace. With this increased usage comes expanded and improved information on design,...
Pipe Design
The pipes and joints, once installed, must be capable of safely withstanding, for the project design life, all in-use service loads, including those associated with the following factors:...
Axial Capacity of Steel Pipe Piles in Clay
Development of theories for the prediction of the axial compressive and tensile load capacities of driven piles is made difficult by a variety of factors, e.g., disturbance of the soil...
Return to search