When AI Meets DIGGS � The Birth of a New Site Characterization Paradigm?
Drilling and sampling to obtain borehole logs, together with various in-situ testing, are usually performed to determine subsurface soil and rock profiles and their associated engineering properties. However,...
Discussion of
(Originally published in
Marine Borers Are Back
Cleaning up the nation's harbors has brought a resurgence in marine borer activity. These organisms, mainly the teredo and the limnoria, eat at timber piers, undermining critical...
Design and Performance of a Piled Raft Foundation
The foundation system for a recently constructed building in Perth, Western Australia, consisted of combined pile groups and raft elements, with a total of 280 bored piles incorporated...
Settlement Analysis for 450 Meter Tall KLCC Towers
The site evaluation and settlement analysis performed for the two tallest buildings in the world currently under construction, are described. The site evaluation resulted in shifting building...
Hydrogeochemical Site Investigations by Teollisuuden Voima Oy, Finland
Groundwater samples collected from cored boreholes (500-1000 m), borehole wells and multilevel piezometers in crystalline bedrock have been characterized and classified. The reference...
Estimation of Water-Filled and Air-Filled Porosity in the Unsaturated Zone, Yucca Mountain, Nevada
The responses of density and dielectric logs are formulated in terms if the matrix properties, air-filled porosity and water-filled porosity. Porosity values obtained from logs from borehole...
Borehole Security on the Yucca Mountain Project
A borehole security plan was developed and is being implemented to address safety, environmental protection and restoration, waste isolation, and security concerns related to boreholes...
Heat Transfer in Vertical Concentric Cylinders in a High Level Nuclear Waste Repository
Modeling free convection heat transfer in an cylindrical annular enclosure is still an active area of research and an important problem to be addressed in the high level nuclear waste...
Application of Indicator Geostatistics to the Gorleben Data Set
This paper describes a trial application of Indicator geostatistical methods to borehole data from the Gorleben site. Indicator variograms have been estimated from the site data and fitted...
Connection of Grouted Tubular Insert Piles to Soil
Force transfer between offshore production jackets and tubular piles is effected by weld bead shear connectors, acting within the grout filled annulus between the piles and pile sleeves...
Case Study of an Offshore Horizontal Boring
A pipeline system was needed to transport natural gas from a discovery in Mobile Block 823 to Mobil's existing system inside Mobile Bay. Sand Island, a small barrier island off Dauphin...
A Wax-Coupled Borehole Seismic Detector for High-Resolution Measurements
A triaxial borehole seismic detector was developed for high-resolution measurements at frequencies up to 2,000 Hz. Applications for this detector include three-component shallow reverse...
Experimental Study of Underground Exploration by Auger Boring on a Mars Rover
A system study was conducted on the possibility of exploring Mars using a Mars Rover, and particular efforts were focused on the underground exploration of Mars by an auger boring machine....
Disposal of Spent HTR Fuel Elements
The emplacement of spent fuel elements from high-temperature reactors (HTR) in deep vertical boreholes in a salt repository is one favorable technique for the disposal of these wastes...
Geophysical Borehole Logging in the Unsaturated Zone, Yucca Mountain, Nevada
Borehole geophysical logging for site characterization in the volcanic rocks at the proposed nuclear waste repository at Yucca Mountain, Nevada, requires data collection under rather unusual...
Dry Drilling and Coring Development for Unsaturated Zone Studies
Two areas of major difficulty associated with characterization of any unsaturated zone are the conventional drilling and coring processes used to acquire the samples. These processes are...
Mechanical Excavator Performance in Yucca Mountain Tuffs
A research effort of four phases is in progress at the Colorado School of Mines. The overall program will evaluate the cutability of welded tuff and other lithologies likely to be excavated...
Recent Development in the Design of Hard Rock Tunnel Boring Machines for the Mining Industry
Underground development for nuclear waste storage will possibly require tunnels to be excavated in a variety of rock conditions and configurations. Recent innovations in Tunnel Boring...
Shaft Boring Machine?A Method of Mechanized Vertical Shaft Excavation
The Shaft Boring Machine (SBM) is a vertical application of proven rock boring technology. The machine applies a rotating cutter wheel with disk cutters for shaft excavation. The wheel...
Return to search