Buckling of Single Layer Latticed Dome under Uniform Gravity Load
This paper reports on experiment and numerical analysis relating the buckling of a single layer latticed dome under uniformly distributed nodal gravity load at the dome central portion....
Collapse Behavior of Double-Layer Space Truss Grids with Member Buckling
The results of collapse tests of over twenty space truss grids with elastic buckling of members are reviewed. The space truss grids include three types, that is, square-on-square, square-on-diagonal...
Ultimate Loading Capacity of Braced Domes
The stability behaviors of a practical latticed dome with 40 metres span are studied in this paper. The geometric and material nonlinear behaviors, as well as the effects of the initial...
Membrane Structures: Technological Innovation and Architectural Opportunity
Presented is a list of materials used in building an airhouse. There are so many other moves in tensile structures and the present interest is in ETFE foils because of light transmission/cost...
The Georgia Dome and Beyond: Achieving Lightweight - Longspan Structures
In the last two decades, the development of longspan roof structures has undergone a quantum leap. The introduction of steel structures, fabric structures, Bucky Fuller's tensegrity structure,...
Georgia Dome Cable Roof Construction Techniques
This paper will provide a case study of the construction of the Hypar-Tensegrity Cable Roof for the Georgia Dome. The paper will emphasize innovative computer analysis of the construction...
Experimental Study on the Strut Type of Cable Net Membrane Structures
In this paper a new type of suspension membrane structure combined with a cable net is proposed, in which the supporting struts are arranged between the membrane surface and the cable...
Fabric Structures for Public Buildings
The design of the enclosure structure of the new Denver Airport derived from twenty years of experience with the design and engineering of fabric structures for permanent buildings. This...
Helium-Supported Hangar for a Small Solar-Powered Airship
For the IGA Expo '93 the Institute for Statics and Dynamics of Aerospace Structures, University of Stuttgart, together with Stuttgart Solar e.V. developed a solar-powered airship. For...
Wall Relief and Three Dimensional Suspension Sculpture Utilizing Tension and Membrane Structures
The aesthetic concerns and observations on sculptural forms involve tension and membrane structures. In the following discussion, the textile forms, which strongly influenced the more...
Current State of Development and Future Trends in Employment of Air-Supported Roofs in Long-Span Applications
Considered here is the low-profile, long span air-supported roof, as opposed to the high-profile 'bubble' variety, which has seen a substantially different development and expectation....
The Use of ETFE Foils in Lightweight Roof Constructions
ETFE foils are polymer film sheets which are enclosed in support frames and inflated to provide stable, insulated and transparent roof cushions for lightweight enclosures. This paper describes...
Study on Mechanical Characteristics of Light-weight Complex Structure Composed of a Membrane and a Beam String Structure
This paper aims at studying a new type of Beam String Structure, in which a membrane is used as finishing material. This paper reports on the mechanical characteristics of this structure,...
Combinatary Net-Shell Roofs of Elliptic Paraboloid of Zhaoqing Gymnasium
Zhaoqing Gymnasium is a multi-functional sports building, whose structural modelling takes Zhaoqing City Flower(Lotus) as the main theme; adopts a combinatory ellipic paraboloid net-shell...
Effects of Spatial Triangulation on the Behavior of Tensegrity Domes
A number of long span 'tensegrity' dome type structures have recently been realized pursuant to the inventions of R. Buckminster Fuller and David H. Geiger. These structures have demonstrated...
Active Control of Axial Forces in Beam String Space Frames
The present work discusses a formulation for active control of axial forces of strings in beam string structures to dynamically and/or statically reduce the responses, and proves both...
Fabric Roof Design Responds to New Technologies
A combination of newer synthetic materials and advanced structural design technologies have given contemporary tensioned fabric roofs vastly improved energy performance and far greater...
A Practical Design and Construction of Tension Rod Supported Glazing
In designing a glass skin-covered space, for the atrium, entrance hall or other core part of a building complex, the high openness and quality requirements of the space often lead to the...
Form Finding Numerical Methods for Tensegrity Systems
The rigidification of Tensegrity Systems is related to selfstress states which can be achieved only when geometrical and mechanical requirements are simultaneously satisfied. This paper...
Direct and Modal Analyses for Shape-Finding of Unstable Structures
Shape-finding analysis of unstable structures has been presented by using generalized inverse (Tanaka and Hangai, 1986). The 'Modal Analysis' using rigid body modes is elegant, but the...
Return to search