Influence of Roughness on Velocity and Dispersion at Low Flow
Dependence of the hydraulic and transport characteristics of low flow on channel roughness is investigated. Empirical expressions are used to estimate roughness coefficient as a function...
Buoyant Jet Solution with Synthetic Entrainment Function
A synthetic entrainment function is proposed for buoyant jets discharged at an arbitrary angle into otherwise quiescent ambient fluids. The entrainment function consists of two separate...
Steady-Site Dispersion of Pollutants in Rivers Near Sewage or Drainage Outfalls
A theoretical model is developed for determination of concentration distribution of pollutants in a river. Pollution is caused by the disposal followed by dispersion of sewage or drainage...
Effects of High Sediment Concentrations on Velocity and Sediment Distributions
Several classifications are required to describe sediment-transporting flow. The flow may be turbulent or laminar, Newtonian or non-Newtonian, and may also have a uniform or nonuniform...
Movement of Tractive Sediment from Disturbed Lands
The Smoky Creek basin of the coal area of northeastern Tennessee shows extensive evidence of tractive movement of coarse sediment from mined tributary basins into the main channel. Coal-rich...
Development of Response Plans for Toxic Spills
A plan is proposed for managing the response to a toxic spill into a river system and the minimization of its effects on water utilities, industry and the environment. As technical aids...
Modeling Effects of Toxicants on Aquatic Systems
Potential effects of chemicals on biomass production in aquatic systems are extrapolated from laboratory toxicological assays. The extrapolation requires that the effect of acute toxicity...
Cost-Effective Water Quality Management and Risks
Environmental regulations typically specify applicable streamflow conditions for compliance with water quality standards. The level of streamflow specified is one of the most significant...
Risk Analysis in Water Quality Control
Design of facilities for the control of water quality is usually predicated upon some explicit expectation of performance. In reality, unit operation efficiency, system operation, model...
Decision Analysis of Coal Ash Disposal Technology
Coal-fired power plants produce a number of solid waste streams in the course of their operation. These coal combustion by-products (CCBPs) are composed of fly ash, bottom ash and boiler...
Scour and Fill Monitoring at Lock and Dam No. 26 (Replacement), Mississippi River
Information gathered during construction of the first stage dam is presented. The information consists of data indicating flows and stages along with data obtained from surveys which monitor...
Sedimentation Study for the Rochester, Minnesota, Flood-Control Project
In a cooperative effort, the U. S. Army Engineer District, St. Paul (NCS), and the Soil Conservation Service (SCS) planned a combined flood-control project. The SCS portion of the project...
RCC Dam Incorporates Innovative Hydraulic Features
An overview of the features of Monksville Dam is presented, with emphasis on the hydraulic components of the project. This 150-foot (45-meter) high roller compacted concrete structure...
Overtopping of Flood Control Levees and Floodwalls
The risk of overtopping can be significant for flood control levees or floodwalls, and the consequences can be costly and potentially catastrophic. Designs using superiority can force...
Numerical Flood Routing for Natural Channels
A numerical model has been developed for simulating the propagation of a flood wave in a natural channel. Using this numerical model, the influence of the factors affecting the motion...
Numerical Modeling of Flow in Hydropower Intakes
To reduce high mortality of downstream migrating juvenile salmon at hydraulic turbines, traveling screens are used to guide the juveniles into a bypass channel for safe passage. However,...
Water and Sediment Movement in Irrigation Furrows
Water movement in an irrigation furrow is simulated by numerically solving the governing equations of continuity and momentum for unsteady, spacially varied flow in a pervious bed open...
Hydraulic Testing of a Large Make-Up Pipeline
A 37 mile pipeline which consists of sections of 114 inch, 96 inch and 66 inch pipes was constructed for delivering secondary sewage effluents for power plant makeup. During initial operations,...
Coping with High and Low Pressures of Transient Flow
Conditions exist in most long distance water pipelines, such that abnormal but inevitable occurrences will cause transient flow. Often the most crucial conditions for consideration by...
Hydraulic Analysis of Water Transmission Flowing Party Full
The hydraulic behavior of a transmission line that flows full along only part of its length is more difficult to analyze than a completely full line. Unsteady open-channel and closed-conduit...
Return to search