Seismic Response and Retrofitting of Non-Ductile Reinforced Concrete Bridges
The Interstate I5/I605 Separator in Los Angeles County was severely damaged during the October, 1 1987 Whittier Narrows Earthquake. This damage included non-ductile shear failure in the...
Bulb-T and Glulam-FRP Beams for Timber Bridges
In this paper, we discusses the manufacturing, analysis, and testing of two glulam beam designers:(1) Southern pine bulb, and (2) yellow-poplar reinforced with pultruded fiber-reinforced...
Prestressed Concrete Failures Due to Uplift
The paper presents some examples of prestressed concrete DOUBLE-TEE (DT) failures caused by hurricane Andrew. The DT's failures was mainly due to the negative moment created by uplift....
Reliability Analysis of Stiffened Panels
This paper presents a methodology to assess the reliability against collapse of structural members, as typified by the buckling collapse of stiffened deck panels in ship structures. This...
Cyclic Performance of Riveted Connections
As part of a larger experimental project on seismic performance of older steel frames, seven concrete-encased and unencased connections were tested. The specimens consisted of both riveted...
Seismic Retrofit of R/C Columns with Inadequate Lap Splices
This paper presents experimental results on the use of rectangular steel jackets to improve the seismic performance of rectangular steel jackets to improve the seismic performance of rectangular...
Compressive Strength of Large Scale HSLA-80 Steel Cellular Sections of a Double Hull Ship Structure
An analytical and experimental large scale test program was conducted to investigate the instability failure modes of cellular double hull box sections. The main emphasis of the study...
Floor to Wall Anchors in Historic Brick Buildings
The poster presentation at the Structures' Congress details a retrofit analysis performed on the Gilroy Historic Commercial Building, which was instrumented during the Loma Prieta Earthquake....
What Controls the Ultimate Load of a Glulam Dome?
A glulam dome is analyzed with the finite element method to determine the governing failure mode and ultimate snow loads. The dome consists of a triangulated network of curved glulam beams,...
Structural Failure and Quality Assurance of Space Frames
Space frame has been developed rapidly in China and used to wide extent to cover various types of buildings. The large scale of application will unavoidably cause quality problems. Damages...
AWS versus AIJ Tubular K-Connection Design Rules
Among various existing design rules for circular tubular connections, the AWS rules are compared with the AIJ rules because of differences between the two. Subjects of discussion include...
Response of Truss Structures Subjected to Dynamic Loads During Member Failure
The paper presents a method for and results from an investigation of the response of a truss structure during the chain reaction of its member failure while subjected to external static...
Structural Integrity of Space Trusses
Space trusses of the double layer grid configuration can experience rapid propagation of failure in the ultimate load condition and thus are potentially vulnerable to progressive collapse...
Collapse Behavior of Double-Layer Space Truss Grids with Member Buckling
The results of collapse tests of over twenty space truss grids with elastic buckling of members are reviewed. The space truss grids include three types, that is, square-on-square, square-on-diagonal...
Membrane Structures: Technological Innovation and Architectural Opportunity
Presented is a list of materials used in building an airhouse. There are so many other moves in tensile structures and the present interest is in ETFE foils because of light transmission/cost...
Study on Structural Characteristics of Air-Inflated Beam Structures
The purpose of this paper is to clarify the structural characteristics of nonlinear load-carrying behaviors of air-inflated beam structures in their finite deflection range and after wrinkles...
Punching Shear of Reinforced Concrete Shell Structures
In reinforced concrete shells punching shear failure may take place, if heavy concentrated loads are applied. Such failure is undesirable, since it does not provide adequate warning and...
Elasto-Plastic Buckling Design for Shallow Cylindrical Shells under External Pressure
Pressures providing elastic-plastic buckling conditions for thin shallow cylindrical shell panels are presented. Classical simple support boundary conditions have been adopted for the...
Fast Monte Carlo Simulations and Safety Index Checking
This paper presents recent techniques which require a small number of simulations to assess the structural reliability. They combine both the concept of importance zones in the random...
Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Structural Reliability
The focus of this paper is to provide an overview of analysis and optimal design of systems in which the system reliability is dependent upon the structure of the system (such as the layout...
Return to search