For Office Buildings: Long Span Concrete Slabs
A survey of 36 office buildings in the United States and Canada featuring long span concrete slabs showed concrete is a technically feasible and cost effective material for office structures....
San Francisco Convention Center Goes Underground
The Moscone Convention Center, built at a construction cost of �126 million, opened its doors to an admiring public on December 2, 1981. The Center's grand exhibit hall, 90...
Engineers Notebook: Checking Capacities of Eccentrically Loaded Columns on an Existing Bridge
This article focuses on the structural analysis of eccentrically loaded columns. A simple and novel graphical technique for determining the load-carrying capacity of the columns is presented....
Chemical Spill Cleanup Named Project of the Year
A 1978 hazardous-waste spill in Michigan has been cleaned up so successfully that the American Consulting Engineers Council named it the 1982 project of the year. Here is how the railroad...
Does Landfill Leachate Make Clay Liners More Permeable?
Most environmental regulations require that clay liners exhibit permeabilities less than 1 x 10/u-7 cm/sec. While permeability is typically determined...
Replacing Corroded Cables on a Cable-Stayed Bridge
The cable-stayed bridge across Venezuela's Lake Maracaibo is among the longest bridges of its type. But after years of service, corroded cables threatened to snap, which would...
Evaluation, Maintenance and Upgrading of Wood Structures
Prepared by the Subcommittee on Evaluation, Maintenance, and Upgrading of Timber Structures of the Committee on Wood of the Structural Division of ASCE. ...
Risk Analysis: Is EPA Changing the Rules?
Recent actions by EPA seem to indicate a departure from past practices in health risk assessment. In the past, findings that a substance is an animal carcinogen have usually led to regulatory...
The Fabricator/Designer Connection
What can the designer-fabricator team do to improve the overall function of design details? One of the best ways is to begin with team work by bringing the fabricator in on the project...
Gravity Sanitary Sewer Design and Construction
This Manual provides both theoretical and pracctical guidelines for the design and construction of gravity sanitary sewers. The initial chapter introduces the organization and administrative...
Protecting Post-Tensioning Tendons in Concrete Structures
Patterns of corrosion problems related to tendon systems are analyzed based on the author's experience in evaluating over 50 corrosion related performance problems in prestressed...
Underground Plastic Pipe
Thirty-nine of the papers presented at the 1981 International Conference on Underground Plastic Pipe are included. The types of pipes examined include: thermoplastics, thermosetting plastic...
Selected Papers by Alfred M. Freudenthal
Civil Engineering Classics
Fifty-six papers written by Alfred M. Freudenthal, or co-authored by Prof. Freudenthal, are included. The papers are divided into three areas: structures, theories of mechanical behavior...
Water Forum '81
One hundred seventy-one papers that were part of the American Society of Civil Engineer's 1981 specialty conference on water issues are included. The publication is presented...
Tall Building Systems and Concepts
The structural, mechanical and electrical systems of tall buildings are explored. The eight areas of focus are, structural systems, mechanical and service systems, electrical systems,...
Dynamic Consolidation - Dramatic Way to Strengthen Soil
The dynamic consolidation technique consists basically of dropping a heavy pounder of up to 4 x 104 kg from a height varying between 50 to 148 ft....
The Structural Fuse: An Inelastic Approach to Earthquake-Resistant Design of Buildings
An alternative to the empirical approach to earthquake-resistant design of buildings is proposed and illustrated with a design example. Instead of strengthening every member to resist...
The ABC'S (and Q) of Cold-Formed Steel Design
Cold-formed structural members are steel components that have been put into their cross-sectional shape by cold bending of flat sheets. Local compressive buckling must be carefully considered...
Design and Construction of World's Tallest Free-standing Fiberglass Stack
The design, fabrication and erection procedures are discussed for a 170-ft free-standing fiberglass reinforced plastic exhaust stack-scrubber system. Advantages and disadvantages in the...
General Principles for the Stability Design of Metal Structures
The Structural Stability Research Council (SSRC) Technical Memorandum No. 5 is explored; this memorandum includes the general principles that form the bases of various SSRC recommended...
Return to search