Field Verification Experiment of a Wave Power Extracting Caisson Breakwater
The Ministry of Transport in Japan is conducting a field verification experiment of a wave power converter with a vertical breakwater called the wave power extracting caisson breakwater....
Experimental Research and Parameters Optimization of a Prototype OWC Wave Power Device
The paper presents the experimental research and parameters optimization of a prototype oscillating water column (OWC) wave power device being built in China by Guangzhou Institute of...
Study on Pneumatic Wave Power Conversion System with the Water Valve Rectifier
We experimentally and theoretically studied the energy conversion characteristics on a new type of wave power conversion system with water valves. The hydraulic model experiment was performed...
Optimal Depth for Nearshore Wave Power Extractors of Fixed Type
An approach to find the water depth which brings the minimum cost of energy extracted with the wave power extractors of nearshore fixed type is proposed. A case study with Pendulor wave...
Theoretical Study on Capture Chamber with Lateral Entrance
A capture chamber with lateral entrance can be used in a pneumatic wave energy conversion system. In this paper, the output power coefficients of the capture chamber have been calculated...
Research and Development of Wave Pump
A new device, 'Wave Pump' is introduced here. The authors present the mechanism of the system, the analytical method for discharge rate, the hydraulic model test...
Water Power Resource Investigations in New Zealand
The New Zealand wave resource is dominated by strong uniform swell incident on its western and southern coasts. Electricorp Production has funded the deployment of a wave rider buoy off...
Wave Power Development in Taiwan
The feasibility study of wave power development in Taiwan was performed in two phases. The first phase included the calculation and assessment of the available wave energy along the coasts...
Progress of Floating Type Wave Power Generator
A floating type wave power generator was improved. It is a Backward Bent Duct Buoy (BBDB) which has an air chamber duct which is bent backwards. It is capable of increasing the peak conversion...
Planning a Full Scale Wave Power Conversion Test 1988-1989
The paper describes the design of the wave power converter and the principal of working. The results from a tank test on a scale model are presented with the main emphasis on design loads...
Double-OWC Wave Power Extractor of a Taut Moored Floating Structure
A double oscillating water column is proposed as a means to improve the efficiency of wave power conversion over a wide range of wave periods in deep water. A mathematical model of the...
Use of Scrap Tires to Harness Wave Energy
A 2.5 meter diameter wave powered pump, fabricated from scrap tires was tested from May 24, 1988 to October 1988 in the Atlantic Ocean at the North Carolina Army Corp of Engineers Waterways...
The Development of Tidal Resources in China: The Tidal Experimental Station of Jiangxia and Its No. 1 and No. 2 Bidirectional Tidal Water Turbine
This article outlines the development and use of tidal energy, specifically, the exploitable tidal energy and the situation of its use in China and introduces the first large bidirectional...
Hydrogen Generation from Sea Water by Means of a Metal Hydrolysis Process
Active metals such as magnesium reacted with steam can produce hydrogen. This reduction of water by magnesium or aluminum is a thermodynamically favorable process, however, formation of...
Estimation of Wave Power as an Energy Resource for Hawaii
One of the most important elements in determining the wave power available by means of a wave power extracting device is the amount of wave energy present at a given location during a...
Power Conditioning Options for Variable-Speed Ocean Energy Conversion Systems
As part of a recent wave energy feasibility study for the coast of North Carolina (SEASUN Power Systems, 1988), a survey was conducted of power conditioning and transmission technology....
Conceptual Design of an Open-Cycle OTEC Plant for the Production of Electricity and Fresh Water in a Pacific Island
A plant, based on the Open-Cycle Ocean Thermal Energy Conversion (OTEC) concept, was designed to supply electricity and fresh water to a Pacific Island community. In order to boost fresh...
Conceptual Design Analysis for Hybrid-Cycle OTEC Plants for Co-Production of Electric Power and Desalinated Water
Hybrid-cycle OTEC power plants are shown to be potentially the most flexible and cost effective in obtaining any specific mix of electrical power and desalinated water. This paper describes...
Pre-Experiments of OTEC Experimental Facility for Ocean-Based Mariculture-OTEC Pilot Plant Houyou
The ocean-based mariculture-OTEC pilot plant 'HOUYOU' was completed in March, 1989 and the at-sea test in Toyama Bay was carried out from July 18th until September...
OTEC's subsurface discharges of Deep Ocean Water: Modelling Their Effects on the Primary Production
The French project of a shore-based OTEC pilot plant (5 MW) at Tahiti gave the opportunity of simulating the ecological effects of a small, man-made upwelling in coastal-tropical oligotrophic...
Return to search