Development of a Hydrologic Model with Both Spatially Distributed and Physically Based Capabilities
A distributed hydrologic model is developed at The Pennsylvania State University for use with rasterized data bases. The purpose of the Terrestrial Hydrologic Model or THM is to investigate...
Runoff Computation Using Spatially Distributed Terrain Parameters
A spatially distributed unit hydrograph is developed based on linear system theory applied to subareas or cells within a watershed Each cell has a unique unit response function independent...
Modeling of Rattlesnake Creek Watershed Using Swat Model
Watershed scale models are widely used in design and operation of river basin projects and for guiding public decisions. This paper presents modeling details of Rattlesnake Creek watershed...
Restoration of Abandoned Meanders on the Middle Fork Forked Deer River, Tennessee
The Middle Fork Forked Deer River in western Tennessee historically had a sinuous course within a wide floodplain. In the early 1900's, local interests dug large straight...
Simulation of Catchment Response Using RC Network
This paper describes a simple physically-based distributed parameter hydrologic model of catchment response using a network of capacitors and resistors. The effect of topography is modeled...
SAMS: Software for Simulating Streamflow Series
This paper introduces SAMS, a computer software developed for the analysis, modeling, and generation of hydrologic time series such as annual and monthly streamfiows. It is written in...
Optimization Modeling of Complex Surface Water Collection Systems
The New York City (NYC) water supply system is currently being modeled using Linear Programming (LP) optimization techniques. A series of simulations were performed to investigate the...
Impacts of Climate Change in the Missouri River Basin
The Soil and Water Assessment Tool (SWAT) is being used as a base model to simulate the Missouri River basin for prediction of the impacts of climate change on water resources in the region....
Water Balance of the Niger Basin
A map-based method is used to construct a monthly water balance model of the 2.3 million km Niger River basin in West Africa. The watersheds and stream network within the basin are derived...
Preliminary Validation of the MAC3D Numerical Flow Model
MAC3D is a recently developed numerical model for three-dimensional incompressible flow. Model predictions are compared with physical test data for a curved open channel and a multi-level...
A Finite Element Analysis of Mach Reflection by Using the Boussinesq Equation
The numerical analysis of Mach reflection, which is the reflection of an obliquely incident solitary wave by a vertical wail, is presented in this paper. For the mathematical model in...
3D Flow Structures?From Laboratory to Field Applications
One laboratory experiment and one field application have been modeled. For each one different sources of errors in the model results could be detected. It may be concluded that the applicability...
Accuracy of a 3D Hydrodynamic Model Verification due to the Relative Magnitude of Forcing Functions
An investigation of relative magnitude of forcing functions in a 3D time-varying hydrodynamic model verification has been performed by identifying some extreme forcing events for an estuarine...
Verification of a 3D Flow Model Using Laboratory Data
The ASCE Task Sub-Committee on 3D Free Surface Flow Model Veri fications has been developing test cases and/or procedures for both computational model developers and users over the past...
Simulation of Dissolved Oxygen in Sacramento-San Joaquin Delta
A one-dimensional model has been developed to simulate water quality in a complex multi-channel estuarine system. The model utilizes a Lagrangian reference frame for transport computations....
Predicting THM Formation with Artificial Neural Networks
An existing mathematical model to predict trihalomethane formation and speciation was enhanced through the use of artificial neural network technology. The model corresponded well with...
Simulating DBP Precursor Transport in Sacramento Delta
Fate and movement of disinfection by-product organic precursors in California's Sacramento-San Joaquin Delta was simulated for a 365-thy period with a hydrodynamics and transport...
Simulation of Pesticide Transport for Verification of the DWRDSM
The California Department of Water Resources Delta Simulation Model (DWRDSM) is periodically verified against new hydrodynamics and water quality field data to ensure reliability and identify...
Increasing Computational Accuracy of Radial Gate Flows
Radial (Tainter) gates are the most widely used flow control structure on large, open channel conveyance systems. In contrast, the hydraulic forces are complicated and this type of gate...
Two Dimensional Modeling of the Mobile River Delta and the Mobile Bay System
Two dimensional hydraulic modeling of Mobile Bay and the Mobile River Delta was conducted to determine critical hydraulic conditions for scour evaluations at bridges in the Mobile Bay...
Return to search