ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Headland Breakwaters in the Chesapeake Bay
The purpose of this paper is to document and evaluate the use of headland breakwaters in the Chesapeake Bay. Headland breakwater systems have been installed in the Chesapeake Bay since...

Rehabilitation of Vertical Thin-Walled Breakwater
Physical hydraulic model tests were conducted to measure wave transmission and force characteristics of a partial vertical thin-walled breakwater. Tests were run for the breakwater in...

Field Experiment of a Wave Power Extracting Caisson Breakwater
The Ministry of Transport of Japan (MOT) is currently developing a fixed-OWC wave power converter called a wave power extracting caisson. This device can be used as caissons for composite-type...

Initial Shoreline Response at the Presque Isle Erosion Control Project
Construction of the Presque Isle Shoreline Erosion Control Project in Lake Erie at Erie, PA began October 1989 and consists of fifty-eight offshore segmented breakwaters with beachfill....

Rehabilitation of the South Jetty-Ocean City, Maryland
The south jetty at Ocean City, Maryland was rebuilt in 1985 to reduce the frequent shoaling in Ocean City Inlet. The project consists of a new jetty offset 30 feet south of the existing...

Redington Shores Breakwater: Beach Response
This paper presents the beach response at Redington Shores, Florida to a detached offshore breakwater constructed in 1986. This paper summarizes the initial shoreline response described...

Topographic Responses to the Construction of Large Port Structures on Oarai Coast
Large offshore breakwater and groins have been constructed at Oarai Port, Japan. As a result, the coast experienced significant topographic changes. In this paper, the responses of the...

Innovative Breakwater Designs on the Great Lakes
Extensive investigations have recently been undertaken to support the development of rubblemound breakwater designs for new marinas at Kenosha and Sheboygan, WI, both located on the west...

Reef Breakwater Design for Lake Michigan Marina
An innovative breakwater concept consisting of a conventional breakwater and a submerged-reef breakwater operating in tandem has been designed for the southern end of Lake Michigan. The...

Environmental Wave Barriers for Small Craft Harbors
This paper describes the history and development of the environmental wave barrier and the current planning and design being undertaken for a major expansion of the small boat harbor at...

Application of a Numerical Model to Develop Marina Concepts
A numerical model is presented to evaluate wave conditions in a marina basin for development and analysis of marina concepts. This model is based on the boundary integral equation method...

Working Breakwaters
Along the Virginia portion of the Chesapeake Bay, shoreline erosion has erased about 40,000 acres of land since 1850. Now a series of headland breakwater systems stems erosion up and down...

Minimum Lifetime Cost Design of Coastal Structures?A Proposal of Design Method for Rubble Sloping Breakwaters
The authors propose herein a rational design method for coastal structures with consideration for their repairs. The special characteristics of the proposal are that a certain extent of...

Redondo Beach King Harbor Model Studies, California
Redondo Beach King Harbor frequently experiences damage when large winter waves occur in conjunction with high water levels. Damages consist of revetment failure, land erosion, flooding,...

Field Verification Experiment of a Wave Power Extracting Caisson Breakwater
The Ministry of Transport in Japan is conducting a field verification experiment of a wave power converter with a vertical breakwater called the wave power extracting caisson breakwater....

Breakwater Choices
Most of the maritime breakwaters built throughout the world are of the rubble mount type, with a protective armor constructed of artificial blocks. Despite the multitude of different shapes...

Reef Breakwater Response to Wave Attack
A method of predicting stability of a class of low-crested rubble mounds referred to as reef breakwaters is presented. Findings are based on a study which included an extensive series...

Reshaping Breakwaters on the Stability of Roundheads and Trunk Erosion in Oblique Waves
The stability of a berm type breakwater (sacrificial breakwater) was tested in a 3-dimensional model at The Hydraulics laboratory, Department of Civil Engineering, University of Aalborg....

Hydraulic Performance of Berm Breakwaters
In recent years, the concept of unconventional rubble mound breakwaters, i.e berm breakwaters, has gained much attention among researchers and engineers as an economical method to build...

Application of Computational Model on Berm Breakwater Design
The development of a computational model on dynamic stability is summarized. The model is able to predict profiles of slopes with an arbitrary shape under varying wave conditions. The...

 

 

 

 

Return to search