Two Full-Scale Tests of Class 3 Composite Beams
This paper presents two tests of continuous composite beams comprising two 7.5 m spans and two concentrated loads close to the intermediate support. Although the cross-sections on the...
Slim-Floor Beams: Design Criteria and Structural Behaviour
Partially concrete-encased steel beams are mostly employed due to their natural resistance to fire, but there may also be other reasons, e.g. to obtain smaller depths of construction....
Comparison of Simple Calculation Methods for the Fire Design of Composite Columns and Beams
There is a need for approximate calculation methods to do the fire design of composite structures. Several of such methods for composite beams and columns have been compared to find out...
Design of Shear Connectors in Composite Bridge Beams
A new approach is described for the design of stud shear connectors, in composite steel and concrete beams that are subjected to vehicular loads, which allows for the interaction between...
Full-scale Tests on Composite Connections
Tests have been carried out on eight full-scale composite connections in which the columns were manufactured of concrete-filled steel circular hollow sections (CHS). The connections were...
Force Transfer in Composite Columns
The force transfer from steel to concrete without mechanical transfer devices in composite columns at points of load introduction is studied. A mechanism of force transfer and the factors...
The Pipe/Soil Stiffness Ratio Variable
This paper reviews the factors which affect the reactions and defines performance limitations of buried flexible plastic pipe as a function of load-induced strains and deflections. The...
The Load Factor
Spangler's load-factor formula for projecting conduits is generalized to all cases of buried rigid pipe, whether in trenches or under embankments; this is in accordance with the analytical...
Chemical Resistance of Thermosetting Resins Used for Cured-in-Place Pipe
This paper summarizes the chemistry, short term physical properties, and long term chemical resistance for representative epoxy vinyl ester, epoxy, and polyester resins that are currently...
Freight Movement in a Changing World and Changing Market Place
The main object of this paper revolves on the fact that for the foreseeable future, the bottom line of intermodal challenges for any North American container port is that business, trade,...
Project of Building Man-made Islands and Development of Port Facilities at the Port of Kobe
The most characteristic point of the Port of Kobe is the building of man-made islands: Port Island and Rokko Island, where the port facilities and container terminals have been arranged...
High-Speed Railways and Development in Japan
There is a need to develop an environmentally friendly railway in response to society's needs, implement high-speed operations on existing tracks, and develop a high-quality, high-speed...
High Speed Rail Initiatives in Korea
The purpose of constructing a high speed rail on the Seoul-Pusan corridor is many fold: to solve intercity traffic congestions, to save energy, to reduce air pollution, and to make possible...
Development of a Superconducting Maglev System
The superconducting maglev system features an electrodynamic levitation system (EDS) which enables a super high speed running without any special control device for levitating a coach...
Accessibility of Geotechnical Earthquake Engineering Data and the Need for Data Storage and Dissemination Standards
Ease of data access and data standards are two issues critical to the success of GIS technology when applied to earthquake hazards research problems that require geotechnical engineering...
ICAO's ACN-PCN Method and Aircraft-Pavement Interaction
Multi-wheel gear assemblies of future aircraft are not compatible with pavements rated in the ACN-PCN system given by the International Civil Aviation Organization (ICAO). The Aircraft...
Evaluation of a Large Aggregate Asphaltic Layer in an Airside Pavement
A new analytical method of designing large aggregate asphalt mixes (LAM) was used to design a thick asphalt base layer for an aircraft taxiway. The results of an analysis on the material...
Evaluation of Elastic Layered Theory for Airfield Pavements, Using Nondestructive Testing and In-Place Response Measurements
Airfield pavement deflections measured under actual aircraft loads were compared to predictions based upon elastic layer theory and moduli backcalculated from failing weight deflectometer...
Hiroshima Seibukyuryo New Town and the New Transit System
This paper introduces a project that will have far reaching social, economic, and cultural significance and which has been labeled as one of the projects that will initiate development...
Honolulu International Airport (HIA) APM
The Hawaii Department of Transportation, in planning to meet passenger demands over the next 20 years, is providing for expanded terminal buildings. The expanse of the airport requires...
Return to search