ATC-22: Development of a Handbook for ATC-14
The ATC-22 project is the development of a Handbook for the application of the methodology of ATC-14 for the seismic evaluation of existing buildings. The development of the Handbook itself...
Postearthquake Safety Evaluation of Buildings
Procedures for the safety evaluation of buildings in earthquake damaged areas have been developed. Two evaluation techniques, Rapid Screening and Detailed Inspection, are described. Rapid...
Seismic Evaluation of Buildings in the Eastern and Central United States
The Applied Technology Council (ATC) has developed and published a methodology, ATC-14, for evaluating specific buildings that is tailored for use by practicing structural engineers. ATC-14...
Retrofitting Existing Seismically Hazardous Buildings
This paper presents a brief overview of the types of problems encountered in retrofitting of existing seismically hazardous buildings. Included is a description of the various types of...
Historic Background of Seismic Construction in San Francisco
A seismic design and construction tradition has developed in California because of the unique experience with local earthquakes. After the 1906 earthquake and fire, building performance...
Making Amends with Nature
The U.S. salmon population has been decimated in the last half-century, principally because of hydropower. In the nation's focus on alternate and clean energy sources, fish...
The Model Cleanup
Standards for hazardous waste site cleanups may be inappropriate or inadequate to protect the public health. Civil engineers responsible for remediation decisions need to know about the...
High Hopes for Cattails
As other areas of wastewater treatment go high tech, man-made wetlands are treating wastewater from small towns and coal mines. Plants are grown in about 1 ft of water. Suspended solids...
Risk Analysis and Management of Natural and Man-Made Hazards
The third Engineering Foundation Conference on Risk-Based Decisionmaking titled Risk Analysis and Management of Natural and Man-Made Hazards was held in Santa Barbara, California on November...
Compaction Grouting as an Aid to Construction
The traditional use of compaction grouting has been to arrest settlement of existing structures, and occasionally to raise them back to their original grades. Recently, the process has...
A Geotechnical Analysis System with Applications for Drilled Shaft Foundations
The development and components of a geotechnical analysis system are described and illustrated for drilled shaft foundations. This finite element-based analysis system incorporates several...
Risk Correction Factors for Bearing Capacity Analysis
In this paper bearing capacity correction factors are developed to account for the randomness in the load and soil properties. These are applied to the bearing capacity equation in the...
Human Factors and Communication Problems in Foundation Engineering
Recent findings in non-engineering fields related to human factors are reviewed with emphasis on communication difficulties. Foundation engineering tasks are discussed in the context of...
Movement Control of Excavation Support Systems by Iterative Design
Conventional design practice for excavation support systems emphasizes determination of loads and selection of structural components. This paper presents a method which uses movement control...
Structural Foundation Practices for Highway Projects
The state-of-practice by State transportation agencies, in the area of structural foundations, is compared between the late 1970's and the present. The structural foundation...
Owner and Designer Advantages Derived from Use of Construction Consultant
There are two significant ways that an experienced construction consultant can assist both the owner and the designer/engineer in obtaining an economical and practical structure. Constructibility...
Cost Effective Pile Foundation Supports Fast Track Paper Mill
This paper decribes the generalized subsurface conditions, pile evaluation and load test program, pile and piling contractor selection, production pile installation, and quality assurance...
Interaction of Geology, Construction Practice and Foundation Design
The influence of geologic knowledge and construction practices on the geotechnical foundation design process has been assessed and summarized. Particular emphasis has been given to the...
Integration of Research Into Design Practice
A widely held perception is that research results flow from the research community along the paths of professional publication into the design offices, where they find practical application....
Reliability in Foundation Engineering Practice
The value and use of reliability concepts in foundation engineering practice are explored, with a focus on two complementary approaches. In the first, macroscopic and action-oriented,...
Return to search