World's Tallest Offshore Platform Stands in 1025 Ft of Water
During the summer and fall of 1977 and 1978, Shell Oil installed the world's deepest drilling and production platform in water. Located in 1025-ft of water at the Cognac tract...
Concrete Microwave Tower is Award Winner
A microwave tower in Florida was built of cast-in-place concrete instead of steel, because: (1)Concrete was considered more esthetic than steel; and (2)concrete was more resistant than...
Underground Buildings Save Energy
While properly designed underground buildings use less energy for heating and cooling, that's not always the reason they're underground. For example, San Francisco's...
$20 Million for Billet Grinding Eliminates Waste
Republic Steel Corp. invested $20,000,000 in the world's largest billet grinding facility for conditioning steel, in Canton, Ohio. It was nominated for the 1979 Outstanding...
Intercity Bridge: First Major U.S. Cable-Stayed Bridge
The Intercity Bridge spans the Columbia River, connecting the cities of Pasco and Kennewick, Wash. It is the longest cable-stayed, concrete bridge in the U.S. (2,403-ft) and it has been...
Largest Inverted Shell Houses Two Theaters
A meeting center in Albany, New York, has such a complex shape that it took months just to design its surface mathematically. Perched on a pedestal, it is nearly elliptical in plan. From...
Space: A Place to Work
An overview of the nation's space program as space shuttle capability nears reality. The cargo truck aspects of the shuttle will transform our efforts in space. In the near...
Building Skyscrapers in Orbit
NASA plans to build a host of large structures (communications antennas, remote-sensing radiometers, solar power satellites, etc.) in space. Three ways to build them are: (1)Fabricate...
Facelifting City Streets
Augusta, Georgia rebuilt a four-block, 10-acre section of the main street (Broad Street) to improve traffic flow, beautify the street, provide safe, efficient and convenient parking and...
Testing Concrete in Place
Although modern concrete construction has developed during the past 60 years, one aspect has remained essentially unchanged�the use of molded cylinders tested in compression to estimate...
Stub Girders Cut Steel Use
One innovation in steel building construction, now 10 years old, is the steel stub girder floor framing system. By using a girder that is a composite of steel girder, metal deck and lightweight...
Jacked Pipe Provides Roof for Underground Construction in Busy Urban Area
Construction of a major underground station for the metro in Antwerp, Belgium was done in a busy downtown area employing a method that virtually eliminated ground subsidence. The method...
Redesigning the Auto: A Key to Solving the U.S. Energy
The automobile is a tremendous consumer of energy. The entire transport sector uses 26% of the energy used in the U.S.�� and half the oil. In fact, the American auto alone consumes one-ninth...
World's First Iron Bridge
In 1779, using a new man-made material, skilled English workmen built a single-span bridge of cast iron over a steep river gorge about 140 miles northwest of London. The result was a 424-ton...
Research Needs in Structural Engineering
Here are some highlights of the state of Research Needs in Structural Engineering, prepared at National Science Foundation�ASCE workshop in June 1979. Overall, the statement says, U.S....
Threaded Rebars Spin Down Time
A rebar splicing technique was a major factor in saving two year's construction time on California's $33 million, 9000 ft (2743 m) Antioch Bridge. Rebar splicing...
Civil Engineering in the Oceans IV
This conference on Civil Engineering in the Oceans is sponsored by the Technical Committee on Ocean Engineering (TCOE) of the Waterway, Port, Coastal and Ocean Division of ASCE in cooperation...
State-of-the-Art Report on Air-Supported Structures
A structure with a structural system which is dependent on pressurization, either positive or negative, is termed a pressure preloaded structure. Most pressure preloaded structures intended...
Repair and Strengthening of Old Steel Truss Bridges
During the early 1900's, numerous pin jointed steel bridge trusses were constructed throughout the United States. In the intervening years, these trusses were replaced by...
Probabilistic Mechanics and Structural Reliability
The purpose of the conference is to present and review the current state of the art of Probabilistic methods and their applications in civil engineering, with emphasis on structural and...
Return to search