Anchoring a Dam
To comply with Federal Energy Regulatory Commission requirements with regard to stability under a postulated Probable Maximum Flood, an extensive foundation investigation and stability...

Aussie Steel
The 50-story Chifley Square Building being built in Sydney will be the tallest Australian steel building. Scheduled for completion in June 1992 at a cost of $310 million, it will house...

Retaining Forest Roads
The U.S. Department of Agriculture, Forest Service, manages a vast system of roads which provide access to America's national forests. More than 250,000 miles of roads exist...

Structures Congress Abstracts 1990
Abstract only. The following themes are included: Rehabilitation and future challenges, Bridges, Earthquake engineering, Dynamic loads on structures, Metals and composite construction,...

Behavior of Structures During Earthquakes
Originally published in: Journal of Engineering Mechanics Division, ASCE, EM4, October 1959, pp. 109-129...

Numerical Model for Tsunami Run-Up
Originally published in: Journal of the Waterways, Harbors and Coastal Engineering Division, ASCE, WW3, August 1970, pp. 701-719...

Progress in Hydromechanics
The historical development of hydromechanics in the fifty years since the founding of the Hydraulics Division is reviewed. Rouse's 1938 text, Fluid Mechanics for Hydraulic Engineers, provided...

Advancement in Tidal Hydraulics
This paper will discuss advances in the field of tidal hydraulics since the inception of the ASCE Hydraulics Division 50 years ago. Activities of the Committees on Tidal Hydraulics of...

Surface Water Hydrology
A brief history is presented of activities in surface water hydrology by the Hydraulics Division since 1938. Included is an historical review of division activities in such areas as precipitation...

Contributions by the Hydraulics Division of ASCE to the Advancement of Ground-Water Hydrology
Papers related to ground-water hydrology published in Proceedings of the ASCE and in Hydraulics Division journals from 1938 through mid-1988 are briefly summarized. The areas covered are...

Development of Hydraulic Structures
The Bureau of Reclamation was established in 1902. Since that time, Reclamation has constructed more than 220 dams. Each dam, depending on its function, has two or more principal hydraulic...

The Colossus Superstructure
This chapter explores the structural elements of the Colossus....

Wind Bracing
This chapter discusses the structural design of the bridge with regards to wind forces....

A Seawall for Sea Mammals
With glass walls only 75 ft from Lake Michigan, an aquarium addition demanded solid seawall protection. Yes, in a strange twist of logic, the first step in creating a whale habitat for...

Building Moon Bases
It is widely accepted that the U.S. will begin to build a base on the moon at the turn of the century, and much of the design work has already been done. Based on papers presented at Space...

Fabric Meets Cable
The newest generation of fabric-roofed stadiums are cable domes designed by David H. Geiger of Geiger Gossen Hamilton Liao Engineers, New York City. He also uses the term tensegrity coined...

Haunches and Hangers
The $210 million VA Medical Center at Houston features a structural system as innovative for the 1990s as the interstitial space concept was in the 1960s. The medical center, designed...

High Tech on Campus
Hannan Hall, the new laboratory building at The Catholic University of America, has a structure entirely made up of precast concrete panels and 24 in. deep double tees. The loadbearing...

Analyzing in 3D
Suggestions for modeling and evaluating three-dimensional (3D) structures are presented. These suggestions are based on the authors' sixteen years of day to day involvement...

Floating Membrane Supertankers: Are They Feasible?
Optimal shapes of long cylindrical membrane containers are obtained by restricting the circumferential membrane stress to be tensile and constant throughout the tanker. Optimality is achieved...

 

 

 

 

Return to search