Hydrologic Design Criteria for Dams with Equal Reliability
Appropriateness of design criteria which require using the same Antecedent Moisture Condition (AMC) throughout Kansas for sizing dams and emergency spillways was examined. AMC values which...
Effective Precipitation in Irrigation Design and Management
Effective precipitation is important in irrigation system design and operation. Numerous methods for estimating effective precipitation have been proposed in the past, including direct...
Crop-Water Production Functions and System Design
A Task Committee to evaluate application of crop-water production functions to irrigation system design and management was established by the ASCE Irrigation Water Requirements Committee...
CWSI and Stomatal Resistance of Cotton and Soybeans
A new instrument, Scheduler(TRADEMARK), has been developed to measure the onset and duration of plant water stress. This device consists of a sensor package (containing an infrared thermometer,...
The Inflatable Weir and Its Widespread Employment for Irrigation in Japan
Although introduced in the U. S. in the 1950's for groundwater recharging, the inflatable weir has become established only in Japan, in which case it is used almost entirely...
Modeling Branching Irrigation Canal Networks
A mathematical model of branching canal network has been developed based on solving the integrated form of Saint Venant equations which describing steady and unsteady, uniform and non-uniform...
California's Dam Safety Program?The Development of Hydrology for Dams (
California's water code provides for supervision of dams and reservoirs with regard to protection of life and property. This code is administered by the Department of Water...
Theoretical Flow Model for Drop Structures
A theoretical model based on the momentum equation is reviewed for a trapezoidal weir drop structure operating in a trapezoidal channel. Preliminary qualitative results indicate agreement...
General Design for Modifications to Existing Lower Santa Ana Drop Structures
A model study conducted at the Waterways Experiment Station investigated the possibility of utilizing the existing drop structures of the Santa Ana River. Initial tests on selected existing...
Liberty Restored
The Outstanding Civil Engineering Achievement of 1987 is the restoration of the Statue of Liberty in New York Harbor. The restoration work included many engineering tasks that by themselves...
Redundancy Evaluation of Existing Bridges
The redundancy of an existing bridge can only be correctly assessed by considering the full superstructure as a single entity. Any formulation based on the analysis of bridge components...
Calibration of a Bridge Rating Formula for Overload Permits
This paper proposes a method to calibrate a reliability based load and resistance factor design (LRFD) permit evaluation formulation that will account for the overloaded truck's...
LFRD Bridge Design as Viewed by the Designer
The load and resistance factor design (LFRD) design concept has been resisted by some bridge engineers on the grounds that it represents a reduction of the 'factor of safety'...
Evaluation of Corroded Steel Bridges
In the United States there is a large inventory of corroded steel bridges. The evaluation of these existing bridges is difficult when considering all the uncertainties involved in deterioration....
Multiple Presence Reduction Factors for Bridges
This paper reviews the multiple presence reduction factors specified in the AASHTO and Ontario codes, and provides a method by which these factors can be established in relation to volume...
Overview of the Guidelines for T/L Structure Loadings
This section introduces a reliability based design methodology that forms the framework for the loading guidelines. A Load and Resistance Factor Design (LRFD) format is presented for the...
Three Automatically Erected Folding Spans
The U. S. Navy has identified three rapidly erected bridges. Each is capable of spanning 400 feet (120 m) with a 70 ton (63 tonne) live load at mid-span. Each will also fold into a 15...
Design of Steel Transmission Pole Structures
This document has been carefully prepared in an effort to provide an authoritative source of information about effective design and fabrication of steel transmission pole structures. The...
Measures Against Wind-Induced Vibrations of Bridges
The design of very flexible structures, such as long-span steel bridges, are frequently governed by wind-induced vibrations. This paper introduces the present situation of the cable-supported...
Structural Systems for Multispan Cable Suspended Bridges
Multispan cable suspended bridges, i. e. , cable-stayed or suspension bridges with a large number of consecutive main spans of equal size, must be carefully designed to become economical...
Return to search