Design Requirements for a Mars Base Greenhouse
One potential method of supplying life support to a manned base on Mars utilizes a Controlled Ecological Life Support System (CELSS). A major component of the CELSS is a plant growth unit...
Candor Chasma Camp
This paper proposes a camp at Mars, in the Coprates region of the Valles Marineris rift, just below the equator on Candor Mensa 6�-12'S, 73�-30'W. Beginning at...
Homesteading Mars
The author gives serious study to setting up a permanent Martian base during the first or second manned Mars mission. The savings of fuel and equipment for the return trips might pay for...
Active Control of Flexural Vibrations in Beams
The feasibility of using piezoelectric actuators to control the flexural oscillations of large structures in space is investigated. Flexural oscillations are excited by implusive loads...
Dynamic Analysis of the Joint Dominated Beam
A method is presented herein to determine the vibration modes of the Joint Dominated Beam. An example of a cantilever beam is selected for this purpose. The truss type beam is analysed...
Response of Advanced Composite Space Materials to Thermal Cycling
In addition to microgravity and lack of atmosphere, the space environment provides intense radiation of both penetrating and nonpenetrating types. This paper focuses on the cyclic radiational...
A Study of Damage in Curved Composite Panels
Composite laminates subjected to a low speed impact, such as a dropped tool or a manufacturing load, often develop an internal delamination. This research studied the effects of a circular...
Fatigue Reliability of Space Structures
This paper develops a methodology for calculating the probability distribution for rainflow cycles in a nonstationary Gaussian process. The up and downcrossing rates are estimated for...
Planetary Base Inflatable Form Construction
The use of the inflatable form (IF) structure has been practiced in the concrete industry for more than a decade. This article proposes the use of a double-walled IF for the Phase I construction...
Progressive Impact Damage Assessment in Composite Pressure Vessels
At the present time, advanced composites have been widely accepted as engineering materials. Analysis techniques for the response of composite materials and structures to static loads...
Inflatable Form Construction in Space
In 1973, NASA launched Skylab 1 using a modified third stage of a Saturn V Rocket. This orbital workshop proved to be a success even though problems occurred. This article discusses the...
Spacecraft Environments: Design Considerations
Design, launch, assembly in orbit, and operation of large space-based systems involve much detailed analysis to ensure mission success. The area of contamination control and environmental...
Containerless Coating Processes for Large Space Structures
Large space structures (LSS) in low earth orbit (LEO) must be able to withstand the deleterious effects of in situ ultraviolet radiation, atomic oxygen, and thermal-cycling-induced microcracking....
Laboratory Investigations of Low Earth Orbit Environmental Effects on Spacecraft Materials
Operations in low earth orbit (100-500 km) must take into consideration the highly oxidative character of the environment. Partial pressures in the range of 10-6-10-7...
Differential Gravitional Forces on Large Space Structures
Effects of the differential gravitational forces have been investigated simultaneously on the orbital motion, attitude motion, and axial deformation of a very large axially flexible space...
Thermal Effects on Large Space Structures with Fixed Attitude
Radiation thermal effects are studied simultaneously on the orbital motion and axial deformation of a very large axially flexible space structure executing planar pitch motion around the...
Robotic Space Construction
This paper touches briefly on some of the highlights of Langley's work in automated space construction. It shows that space trusses similar to those likely to be used on the...
Robotic Influence in the Conceptual Design of Mechanical Systems in Space and Vice Versa: A Survey
A survey is presented of the methods of constructing structural elements in space by the application of robotic devices. Two fundamentally different approaches to the solution of robotic...
Simulator for Telerobotic Assembly, Maintenance and Repair of Large Space Structures
A first approximation level computer simulator for telerobotic assembly of large space structures is described. Approach, methodology and initial results are presented. An example based...
An Overview of the Ease/Access Space Construction Demonstration
With the successful completion of the EASE/ACCESS demonstration, NASA took a significant step toward understanding construction in space. These experiments were performed on November 29...
Return to search