Conservation Properties of Flow Simulation Models
The fundamental equations of fluid mechanics and hydraulics posses certain integral properties which should be maintained by their discrete analogs. In this paper the conservation properties...
The Method of Lines Solution of Unsteady Open Channel Flow Equations Along Characteristics
The method of characteristics (MOC) has long been considered as a natural procedure for solving transient flow problems. In this paper, by using the concept of the method of lines, the...
Integration of GIS, Remote Sensing, and Digital Elevation Data for a Hydrologic Model
The Agricultural Nonpoint Source Pollution Model (AGNPS), which was developed by Agricultural Research Service, was used as a test model for assessing nonpoint source pollution. The model...
Paleoflood Hydrology and Design Decision for High-Risk Projects
Paleoflood hydrology is not merely one of several alternative methods for risk-based design. Rather, certain kinds of accurate data on the largest paleofloods of recent millennia provide...
Regionalization of Precipitation Droughts in the Scioto River Basin
By the use of monthly precipitation, droughts are defined based on different truncation levels, namely, 70%, 80%, 90%, and 95%, where a 70% truncation level means that 70% of the recorded...
On the Problem of Sediment Deposition in Large Reservoirs
Sediment deposition and its accumulation in a large reservoir depends on the inflow and reservoir storage content, respectively. This fact is used to model the cumulative deposition of...
Application of the Ackers-White Procedure for Transport by Size Fractions and Testing in HEC-6
Modification of the Ackers-White method for the calculation of sediment transport by size fractions has led to a procedure which not only permits such calculations, but also increases...
Municipal Stormwater Management Ordinance Development and Implementation in Pennsylvania
This paper discusses the critical planning and engineering components of a sound stormwater management ordinance and how they can be shaped to avoid commonly encountered basin-wide implementation...
The Hydraulic and Hydrological Interactions Between Urban Sewer Systems and Receiving Waters at High Discharges
In the transition region from sewer to river, the penetration of river flood water into the sewer network or the hydraulic overload of small rivers due to sewer system discharges, may...
Pressure and Stress Distributions Due to a Submerged Impinging Jet
This investigation examines the pressure and shear stress distribution at a smooth planar boundary in the impingement region of a submerged vertical jet in water. The mean pressure and...
A Generalized Diffusion Wave Flood Routing Model
A generalized diffusion wave model for flood routing is presented. The model can incorporate detailed data on natural cross sections and river bed geometry. An accurate numerical method...
A Multimode Scheme of Characteristic Method for Open Channel Flows
This paper deals with the stability and accuracy of a multimode scheme, based on the method of characteristics, for unsteady one-dimensional open-channels flows. This scheme combines three...
Diffusion Wave Overland Flow Module
This paper documents the diffusion-wave overland flow module contained in the FORTRAN-callable routine OVERLAND. Subjects covered include the theoretical background, model formulation,...
An Expert Advisor for Selective Withdrawal Operations
A rule-based computational advisor that aids in the selection of selective withdrawal operations for project release temperature maintenance is discussed. This advisor couples a one-dimensional...
Maintenance Scheduling for Water Resource Systems: An Application to Advance Maintenance Dredging
A number of investigations have been performed in the recent years to analyze the effect of advance maintenance and to see if it is justifiable. These studies gave promising results but...
Use of Linear Programming for Hydraulics Problems
Water is becoming a more and more precious commodity worldwide with each passing day. At the same time, the optimum and most productive solutions to water control and utilization are becoming...
Equivalence Between Regular and Irregular Waves in Movable-Bed Models
Laboratory experiments were conducted to evaluate various irregular wave parameters to determine which provides the best match for the regular wave parameter used to develop design guidance....
The Calculation of Flushing Flows for Gravel and Cobble Bed Rivers
Flushing flows are needed to remove fines and sand from a gravel or cobble bed river. A natural stream will have periodic high flows adequate for flushing of fines and sand, but the hydraulic...
Physical Forces Generated by Barge-Tow Traffic Within a Navigable Waterway
Movement of navigation traffic such as barge tows within a restricted inland waterway such as the Illinois, Mississippi, or Ohio Rivers can and will alter the flow field in and around...
The Equivalence of Path and Node Methods for Water Distribution Network Analysis
This paper deals with the equivalence between commonly employed methods, path and node adjustment methods, for analyzing water distribution networks. The basic equations for steady-state...
Return to search