Applications of the Singular Point Method to Hydraulic Analysis of Spillways
A computer-oriented procedure is described to develop rating tables for side channel spillways. The procedure includes three sets of computations which have to be performed iteratively...
Hydraulic Design of Pamo Dam Spillway
The design of the emergency spillway for the San Diego County Water Authority's (SDCWA) proposed Pamo Dam is discussed. Pamo Dam is a 264-foot (80. 5 meter) high roller compacted...
Modeling Sediment Yield Affected by In-Stream Sand Mining
Sediment yield refers to the amount of sediment having passed a given river section for a specified duration. While sediment will be stored in the borrow pit, it will also be depleted...
Hydraulic Availability Evaluation of Urban Water Distribution Systems
This paper presents a concept for evaluating urban water system reliability using an extended period hydraulic simulation model in conjunction with mechanical availability analysis. Reliability...
Scour Downstream of High Level Emergency Spillways
The Corps of Engineers has numerous high level emergency spillways (HLES) including some that have the potential for excessive scour downstream during certain flow events. 'Excessive...
Development of Scour Channel After Spillway Failure
In November 1985 parts of the spillway which controlled the water level in Lake Charleston failed during a moderate flood event. The spillway failure resulted in formation of a large 'sinkhole'...
Low Head Dam Safety Studied with Hydraulic Models
Use of physical models to study the hydraulic jump or submerged roller action created as water overflows low head dams provides an opportunity to develop design criteria for various structure...
Modeling Materials for Protecting Earth Weirs
This paper reports laboratory experiments on various materials used to protect earth weirs. Dumped rock, gabion mattresses, and shaped blocks on a gravel layer were subjected to high velocity...
Model for the Optimal Rehabilitation and Replacement of Water Distribution System Components
The objective of the model presented is to determine the minimum cost solution, given the nonlinear nature of the equations required to describe the cost and the hydraulics of a water...
Estimation of Navigation-Dam Discharge in Illinois
Techniques were used to estimate discharge for the Brandon Road Dam on the Des Plaines River and the Dresden Island, Marseilles, and Starved Rock Dams on the Illinois River in northern...
Design of Overtopping Protection for Small Dams
Many existing small embankment dams in the United States cannot safely pass current design floods without overtopping. In the past several years, embankment overtopping protection has...
Spring Creek Dam is Ready for the PMF: A Case History
Spring Creek Dam is the first earth embankment dam in Colorado, with inadequate spillway capacity, to be modified utilizing roller compacted concrete (RCC). With a structural height of...
Modelmania
The idea that model testing could be useful in planning for the control of water in rivers and other waterways received little support in this country until John R. Freeman's...
Evaluation of Sand as a Modeling Material Using Vellinga's Guidance
An experimental series of flume tests were conducted using three sizes of sand as modeling sediment in order to evaluate the effect of sediment grain size and the range of validity of...
Advanced Concept for Generation of Waves in Hydraulic Models
This paper describes a new wavemaker for the generation of naturally occurring waves in physical models of coastal areas. Recent research incorporating directional aspects of monochromatic,...
Hydraulic Model Investigation of the North Diversion Structure, Albuquerque, New Mexico
The North Diversion Structure diverts storm runoff around Albuquerque, New Mexico. Observed flow conditions have caused concern about the capacity of the structure and the safety of a...
Physical Modeling to Study the Extent of Removal of an Existing Lock and Dam on the Mississippi River
Locks and Dam No. 26 is located on the Mississippi River approximately 202. 9 river miles above the mouth of the Ohio River. This paper will discuss the utilization of a physical model...
Developing a User Friendly System for Water Distribution Management Applications
A hydraulic computer model of a water distribution system that can be updated with current billing (customer meter readings) information automatically. The model was calibrated with field...
Input Programs for Engineering Applications
This paper discusses several input program types and the data structures associated with them. Two input programs were designed for KYPIPEF to demonstrate the use of files of records and...
Composite Resistance to Flow With an Ice Cover
Recent data collected on several rivers in Michigan suggest, with only an ice cover present, that Manning's roughness ratio is constant at n//R equals 0. 65. If other ice...
Return to search