Implementation of FEMA Guidelines on Alluvial Fans
This paper provides a general basis for analysis and mapping of flood hazards on alluvial fans. Federal Emergency Management Administration (FEMA) alluvial fan methodology is discussed...

Cross Sectional Area Reduction Floodway Method
Encroachment on the floodplain, such as structures and fill, reduces the stream's flood carrying capacity, increases the flood heights and velocities, and increases flood...

Boundary Conditions of Tidal Model at River Mouth
A small grid is required to schematize irregular shape of shoreline in the vicinity of river mouth which limits the modeling area to be small. Tidal records along the boundary show no...

Sorting of Mixed Sand on a Two-Dimensional Beach
A numerical method is developed to predict temporal variations of the sea bed topography and the bed-material composition. The predicted results are compared with the measurements in a...

Comparison of DAMBRK With DWOPER for Computing Water Surface Elevations at Stream Junctions
The National Weather Service computer programs DWOPER (Operational Dynamic Wave Model) and DAMBRK (Dam-break) are one-dimensional models using an implicit finite difference method of solution...

A Frictional Resistance Model for the Analysis of Non-Point Source Pollution Processes
This study experimentally investigated the effect of a permeable bed for steady, laminar and smooth turbulent free surface flow on the Darcy-Weisbach friction factor. Flow velocities and...

Effects on Reservoir Water Quality Caused by Changes in Inflow Plume Hydrodynamics
In this paper, the effects of environmental changes on the hydrodynamic behavior of the Las Vegas Wash inflow into Lake Mead are discussed from the view-point of water quality. It is hypothesized...

CORMIX1: Expert System for Mixing Zone Analysis of Pollutant Discharges Into the Water Environment
The Cornell Mixing Zone Expert System (CORMIX) is an integrated software package for the analysis, prediction, and design of aqueous toxic or conventional pollutant discharges into watercourses....

Water Quality Monitoring of Highway Construction
The primary objective of water quality monitoring, as it relates to highway construction, is to obtain quantitative information to ensure that runoff from the construction site does not...

Greenhouse Effect on Estuarine Saltwater Intrusion
A report by the British Department of the Environment calls for research into the effect of a rise in world temperatures on sea levels. Model studies should investigate changes in the...

Interfacial Instability in Highly Stratified Flows
The stability of highly stratified shear flows is dependent on several parameters including the thickness of the interfacial transition layer. Experimental results show that the thickness...

Land Drainage and Estuarine Salinity Response
An investigation is being conducted to (1) quantify the short-term effects of freshwater agricultural drainage on salinity in a tidal creek and (2) evaluate the off-site effects of water-control...

The Effects of Bank Protection on River Morphology
Revetment of bends with radius of curvature to width ratios (R/W) between 1.9 and 3.3 on Red River AR, and Sacramento River CA, does not cause the expected thalweg deepening and channel...

The Role of Vegetation in River Bank Erosion
The purpose of this paper is to describe briefly how streambank vegetation, both roots and shoots, modify the 'skin' or surface layer and how this in turn affects...

Estuarine Mud Flow Modeling
This paper presents a model for the simulation of selective withdrawal of estuarine mud. This research is part of the investigation of the design of a mud pumping plant as an alternative...

Improved Numerical Analysis of Steady Water Surface Profiles
As well as HEC-2 and similar models serve the profession, problems exist with their application. In general, inflexibility of use and inaccuracies around transitions between subcritical...

Numerical Modeling of Hydraulic Jump
Boussinesq equations describing one-dimensional unsteady, rapidly varied flows are numerically integrated by using a second-order and a fourth-order accurate explicit finite-difference...

General Formulation of Best Hydraulic Channel Section
The best hydraulic channel section is determined by using Lagrange's method of undetermined multipliers. The approach presented is more general & easier to apply than...

Bank Protection at the Middle and Lower Yangtze
The Middle and Lower Yangtze runs through alluvial plains about 1800 km. There are mainly three types of river reaches: straight-slightly sinuous, meandering, and braided. This paper outlines...

State-of-the-Art Report: Mexico
Design recommendations for groins and spur dikes are presented. For groins the most important ones are: to build them with sloping crests, orientated downstream and maximum spacing of...

 

 

 

 

Return to search