Identification Techniques for Bank Erosion and Failure Processes
The Hydraulics Laboratory of the US Army Engineer Waterways Experiment Station (WES) has developed techniques to design small flood-control channels. A component of this research is the...
Failure Modeling of Hydraulic Systems
Techniques of survival analysis are investigated for modeling the failure of hydraulic systems. The Proportional Hazards Model has the advantage of being able to separate the effects on...
Optimal Design of Highway Drainage Structures
Hydraulic design of a bridge or culvert using a risk-based approach is to choose among the alternatives the one associated with the least total expected cost. In this paper, the risk-based...
Conceptual Evaluation of Dam Safety by Instrumentation
The criteria governing the design of dams can frequently be imprecise. One of the most practical methods of evaluating dam safety in the dam safety surveillance programs is to check the...
Conservativeness in Hydraulic Engineering Studies
Hydraulic engineers routinely make a variety of assumptions during the course of a study. Assumptions, once made, usually become incorporated into the fabric of the study and are seldom...
Stability Criteria for Revetments
A simplified 'black box' approach is presented for a number of revetment systems for banks and shore protection. The design criteria, based on the physical similarity...
The Influence of Uniformity on Riprap Stability
Studies have shown that size uniformity influences the stability of riprap. The ratio of fractional sizes of the riprap mixture, D60/D10,...
Design and Construction of Soil-Cement Drop Structures
Soil-cement has been used as an effective and economical slope protection material for embankment dams and stream banks. This paper describes the use of soil-cement in the construction...
Characteristic Deformation of Alternate Bars Due to Low Flow
Experiments on the formation of a small meander-channel at low stage are conducted by supplying a proper discharge on initial bed of alternate bars that have been formed in experimental...
Uncertainty Estimates for Rainfall-Runoff Model
Almost all rainfall-runoff link-node models in use today involve the subdivision of the catchment into smaller areas, linked together by a system of channel links. These 'link-node'...
Evaluation of the ARS Low Drop Grade Control Structure
The ARS low drop grade control structure was developed by Little and Murphy to provide efficient energy dissipation and effective grade control for streams in northern Mississippi. The...
Mt. Elbert Pumped Storage Trashrack Failure
The failure of three trashrack sections for unit 2 at the suction-draft tube intake occured after one year in service. However, the trashracks for unit 1 had five years of service with...
Guard Gate Tests at Tieton Dam
The emergency gate hoist system on the guard gates at Tieton Dam, near Yakima, Washington, was tested as part of the United States Bureau of Reclamation Safety Evaluation of Existing Dams...
Characteristics of the Flood Release-Induced Vibrations with Qianshui Thin-Arch Dam
In this article the prototype observations and design analyses are described regarding the flood release-induced vibrations of the Qianshui thin-arch dam and its foundation; and their...
The Sediment Weighted Histogram Generator and Estimation of Sediment Transport Trends
Long term sediment transport trends may be evaluated using a sediment histogram generator program that was written for microcomputers. Flows can be extracted directly from a compact disc...
Status and New Capabilities of Computer Program HEC-6: Scour and Deposition in Rivers and Reservoirs
Last year the Hydrologic Engineering Center (HEC) and the Waterways Experiment Center (WES) incorporated the results from more than ten years of research and development into a new version...
Municipal Stormwater Management Ordinance Development and Implementation in Pennsylvania
This paper discusses the critical planning and engineering components of a sound stormwater management ordinance and how they can be shaped to avoid commonly encountered basin-wide implementation...
Development of a Computer Aided Decision Process for Channel Rehabilitation and Watershed Enhancement Techniques
To assist the engineer in planning and design of channel stabilization measures, an expert system (CADWET) was developed using a commercially available expert system shell program. The...
Use of Linear Programming for Hydraulics Problems
Water is becoming a more and more precious commodity worldwide with each passing day. At the same time, the optimum and most productive solutions to water control and utilization are becoming...
Pump Selection Program and a Better User Interface
Numerous highly innovative computer solutions to engineering problems are of little use to the practicing engineer because these programs are not supported by adequate user interface....
Return to search