Experimental Techniques to Study the Microstructure of Cement-Based Materials
Techniques to identify phases and changes in microstructure within cement paste, mortar, and concrete using a scanning electron microscope and image analysis system are described. Backscattered...
Cement and Concrete Characterization by Scanning Electron Microscopy
The scanning electron microscope (SEM) is a powerful tool for the microstructural and chemical characterization of cement and concrete. Imaging techniques such as secondary electron, backscattered...
Studies of the Interfacial Properties of Fiber Reinforced Cement
The multiple fiber pull-out tests were conducted with steel wires and alkali resistant glass fiber strand in order to characterize the behavior of interface of fiber and cementitious matrix....
Atomistic Simulation and Visualization of Thermal Disorder in a Crystalline Ice
The process of thermal disorder in crystalline ice has been simulated using a molecular dynamics model. The thermal disorder is induced by raising the temperature of the system. The molecular...
Simulation of Failure Processes in Cementitious Particle Composites
Progressive failure analysis in cementitious particle composites such as concrete requires a realistic description of the topology of the composite structure and the interaction of the...
Material Testing at High Pressure
A static test cell has been designed and fabricated to apply a peak stress of up to 2 GPa to a 2.54 cm cylindrical specimen. The cell design was based on the 'belt'...
Mechanical Behavior of Composites with Interphases
The effect of interphases on the mechanical behavior of fiber-reinforced composites is studied. Two problems, a cracked fiber in a matrix, and a fiber pulled out of a matrix, are discussed....
Theoretical and Experimental Mechanisms of Toughening in Multi-phase Materials
Multi-phase materials are an important class of materials being developed for aerospace primary structural applications. Multi-phase materials are those materials consisting of two or...
On Statistical Micromechanical Process Damage Models for Brittle Solids with Interacting Microcracks
Two-dimensional micromechanical damage models with strongly interacting microcracks are presented to investigate the overall nonlinear mechanical responses of microcrack-weakened brittle...
Nonlocality of Continuum Approximation of Microcracked Materials
A continuum with nonlocal damage has recently been shown to be an effective approach for the analysis of strain-softening structures. The basic idea is that only the damage, normally caused...
Micro-Damage Process Model for Polycrystalline Ice
This paper presents a micro-damage process model for freshwater polycrystalline ice deforming at the high end of the ductile-to-brittle transitional domain of strain rated. Damage is attributed...
Crack Growth Stability in Ice
The mechanics of stable, time dependent crack growth as a function of geometry and increasing crack length in saline an freshwater columnar ice are examined in this paper. Experimental...
Strain Rate Effects on Pressuremeter Testing
This paper discusses the effect of strain rate on the cavity expansion problem and pressuremeter test. A cuboidal shear device, CSD, was used to perform pressuremeter strain path tests...
Moisture Diffusion in Concrete and Mechanisms of Drying Creep
The Pickett effect is the excess of creep at drying over the sum of shrinkage and basic creep. Several theoretical models have been presented to speculate on the mechanisms of this effect,...
Deformation of Concrete Due to Drying
The deformation of drying concrete is numerically investigated considering the effect of random arrangement of coarse aggregates. The result indicates that a part of the statistical variation...
A Phenomenological Approach to Physico Chemical Phenomena Coupled with Damage in Massive Concrete
This paper presents the first experiments which have been done to support the bases of a thermomechanical model coupled with damage and to identify the characteristics parameters needed...
A Model to Predict Restrained Shrinkage Cracking of Fiber Reinforced Concrete
Cracking due to restrained shrinkage occurs very often in an engineering practice, causing serious problems such as increased water permeability of the structure and corrosion of the reinforcement....
Influence of Finite Deformations in the Stress-Strain Modelling of Granular Media
An incremental formulations of the stress-strain law is presented for quasi-static deformation of granular solids. The stress-strain relationship is derived for an element of granular...
Models for Rock Mass Dynamics
The phenomenology of explosive effects in hard rocks is of interest to workers in the energy field, in the defense field, and in planetary science. The salient characteristic of hard rock...
Instability and Plastic Flow of Soils
Materials should according to Drucker's postulate become unstable when the second increment of plastic work is negative. Experimental observations however show otherwise....
Return to search