ASCE will be sunsetting the Civil Engineering Database (CEDB) on December 1, 2025. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Methodology for Developing an Engineering Solution for Web Crippling
This paper describes the methodology used to develop an engineering solution for web crippling of aluminum trapezoidal sections. The development has two steps. The functional form for...

Stability Analysis of Nonlinear Frames
The second stiffness method for large deformation in-elastic stability analysis of frames is discussed. Displacement control methods for tracing the path beyond the limit point are presented....

Ultimate Loads of Steel Frames with Imperfections
As for real structures, initial geometric imperfections are inevitable and may have a destabilizing effect on the structures. The present research deals with the study of this imperfections...

A Second Order Analysis Technique for Nonprismatic Bridge Piers
An approximate second order method is presented for the analysis and design of cantilever compression members. Prismatic members with nonconstant reinforcement, and nonprismatic members...

Computational Failure Analysis of Reinforced Concrete Plate Structures
The paper summarizes our recent effort in developing a suitable finite element code for the failure prediction of reinforced concrete structures. The basis of the development is a plasticity...

A Mixture Finite Element for Reinforced Concrete
A semi-analytical finite element is presented for analyses of cracked reinforced concrete (RC) structures including bond action between rebar and concrete, and crack-face shear transfer....

Thermal Effects in a Transient Study of Fracture
Studies, e.g. Zehnder and Rosakis (1989), indicate that fracture is associated with temperature rises in inelastic zones near the crack edge. To gain more insight into this phenomenon,...

Nonlinear Response of Ground Supported Slabs
Refined techniques for the structural analysis of ground supported concrete slabs are presented. The principles of limit state design in terms of strength and serviceability are implemented....

Safe-Load-Limit of Plates in Cylindrical Bending
The derivation of a closed-form expression for the viscoelastic critical load of long thin plates undergoing cylindrical bending and made of a linear time-dependent 'solid'-type...

Analysis of Delamination Onset and Growth in Curved Laminates
This paper details an analysis to characterize delamination onset and growth from a matrix crack in a curved composite laminate. Finite element analysis was used to determine values of...

Analysis of a CMC Compact Tension Specimen
A cohesive force model is applied to study the stability of fiber failure in a ceramic matrix composite compact tension specimen. By controlling the length of the bridged crack results...

Interlaminar Fracture Toughness Test: Traditional and Modified
For brittle, transversely isotropic, composite materials we have developed an alternative Mode II interlaminar fracture toughness test (G_IIc) that...

Postbuckling Analysis of Composite Stiffeners under Uniaxial Compression
This paper presents an analytical and experimental study conducted for postbuckling of I-section stiffeners. A stability analysis was carried out to determine postbuckling response of...

Characterizing Mode I Fatigue Delamination of Composite Materials
Evaluation of two techniques to characterize fatigue delamination using the double cantilever beam (DCB) specimen are presented. The two techniques were the delamination growth onset (G-N)...

Characterization of Acoustic Emission Signals
Separation of crack growth signals is of fundamental importance for detecting, locating and determining the significance of an internal flaw using acoustic emission techniques. An analytical...

Design Considerations for Large-Scale Filament-Wound Composite Structures
An experimental investigation was conducted to quantify scaling effects in filament-wound composite structures. These preliminary results support the notion that an increase in thickness...

Optimum Design of Laminated Metal Matrix Composites
With the increased demand for high-strength, lightweight materials that function successfully in high temperature environments, the effective development of metal matrix composites has...

Frictionless Contact of Composite Laminates
An approximate solution technique for determination of contact stress distribution under a curved, rigid punch indenting an arbitrary laminated composite plate is outlined. The individual...

Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...

A Damping Model for the Vibration of Nonlinear Laminated Composite Cylindrical Panels with High Order Transverse Shears
The damping characteristics of nonlinear vibration of a cylindrical panel including large displacements/rotations and parabolic transverse shears has been discussed in this study. The...

 

 

 

 

Return to search